Dynamic graphs are graphs that update continuously during the filtering process. The following dynamic graph styles are available.

Note: Dynamic graphs are limited to showing the last 2000 points per line.

Satellite Dynamic Graphs of Filter Output | |
---|---|

Style | Description |

Atmosphere Density Estimate | Filtered estimate of dRho/Rho compared to +/- 2-sigma error bounds of the estimate. |

Ballistic Coefficient | Shows the correction of a satellite's ballistic coefficient as the filter runs. |

Position Uncertainty | Shows, for a satellite, the 2-sigma errors in the radial, intrack and crosstrack position components. |

Residual Ratios | Enables a unitless test of all residuals computed for a satellite. |

Solar Pressure Parameter Estimate | Filtered estimate of the correction to the solar pressure parameter compared to +/- 2-sigma error bounds of the estimate. |

Velocity Uncertainty | Shows, for a satellite, the 2-sigma errors in the radial, intrack and crosstrack velocity components. |

Dynamic graphing styles are provided to show filtered measurement residuals for the following measurement types. Unless noted otherwise, all dynamic measurement residual graphs include +/- 3-sigma bounds and the filtered measurement bias estimates.

- 1 Way Bistatic Range
- 3L Doppler
- 4L BRTS Range
- 4L Range
- 5L BRTS Doppler
- 5L Doppler
- Azimuth
- CA Nav Sol (three components shown; ignore bias estimate)
- Declination
- DF Nav Sol (three components shown; ignore bias estimate)
- Direction Cosine East
- Direction Cosine North
- Doppler
- DSN 3W TCP
- DSN 3W Doppler
- DSN Doppler
- DSN Sequential Range
- DSN TCP
- Elevation
- Eph Pos (three components shown; ignore bias estimate)
- Eph Vel (three components shown; ignore bias estimate)
- FDOA
- SD FDOA
- Ground FDOA
- Ground TDOA
- NP Range
- Range
- Right Ascension
- SB Azimuth
- SB Declination
- SB Elevation
- SB FDOA
- SB Range
- SB Right Ascension
- SB TDOA
- SB TDOA Dot
- TDOA
- TDOA Dot
- SD TDOA
- X Angle
- Y Angle

The following table contains descriptions of special cases of measurement residual graphs for GPS receivers.

GPS Receiver Dynamic Graphs of Filter Output | |
---|---|

Style | Description |

2L CA Pseudo Range Residual | For a given GPS receiver, 2L CA pseudo-range residuals are shown with 3-sigma error bounds together with the filter estimate for a bias. |

Clock Frequency Estimate | Filtered estimate of the GPS receiver clock frequency estimate compared to the +/- 2-sigma error bounds of the estimate. Only displayed when clock frequency is a modeled state parameter. (Clock phase and frequency are modeled when "raw" CA, P1 or P2 measurements are processed, and are not modeled when Single Differenced (SD) measurements are processed.) |

Clock Phase Estimate | Filtered estimate of the GPS receiver clock phase estimate compared to the +/- 2-sigma error bounds of the estimate. Only displayed when clock frequency is a modeled state parameter. (Clock phase and frequency are modeled when "raw" CA, P1 or P2 measurements are processed, and are not modeled when Single Differenced (SD) measurements are processed.) |

The following measurement types are available as dynamic residual graphs for a GPS receiver object. Each graph will show the filtered measurement residual, the +/- 3-sigma error bounds, and a bias estimate which can be ignored.

- CA DD Pseudorange
- CA Pseudorange
- CA SD Pseudorange
- DF DD Phase
- DF DD Pseudorange
- DF Phase
- DF Pseudorange
- DF SD Phase
- DF SD Pseudorange
- L1 DD Phase
- L1 Phase
- L1 SD Phase
- L2 Phase
- L2 SD Phase
- LA DD Phase
- LA Phase
- LA SD Phase
- P1 Pseudorange
- P2 Pseudorange

Transponder Dynamic Graphs of Filter Output | |
---|---|

Style | Description |

Transponder Delay Estimate | Filtered estimate of the correction to the transponder delay compared to +/- 2-sigma error bounds of the estimate. |

Facility Dynamic Graphs of Filter Output | |
---|---|

Troposphere Bias Estimate | Filtered estimate of the correction to the troposphere delay compared to +/- 2-sigma error bounds of the estimate. |

You can select one or more of the above styles in the Dynamic Product Selector. The Simulation Wizard includes a page for selecting dynamic graph styles.

ODTK 6.5