Dynamic Reports

Dynamic reports are reports that update continuously during the filtering process. The following dynamic report styles are provided with ODTK:

Satellite Dynamic Report Styles
Style Description
Instant Maneuver Estimate Update Data is displayed during a filter run when the filter is configured to estimate instant maneuvers for the satellite, and the data is updated during maneuver estimation and until the estimate converges. If there are more than two maneuvers being estimated in a filter run, the window will show data for the two latest maneuvers. Data includes maneuver name, time, and status; estimates and uncertainties in the input and inertial frames; and corrections in terms of magnitude and direction.
Measurement Bias Update A tabbed window that dynamically displays range, doppler, azimuth and elevation bias and sigma values for the tracker (facility) of the current measurement.
Measurement Update Dynamically displays estimates of orbit state, the RIC sigma-correlation matrix, corrections to non-orbital parameters (air drag dRho/Rho, solar pressure coefficient, transponder delay), and the residuals, sigmas and ratios for range, doppler, azimuth and elevation measurements as each measurement is processed.
Time Update Dynamically displays estimates of orbit state, the RIC sigma-correlation matrix and corrections to non-orbital parameters (air drag dRho/Rho, solar pressure coefficient, transponder delay) throughout the filter run, both while measurements are being processed and during prediction periods.


GPS Receiver Dynamic Report Styles
Style Description
Measurement Update Dynamically displays estimates of the GPS Receiver clock phase and clock frequency errors when clock phase and frequency are modeled state parameters. The pseudo-range residuals, sigmas and data editing ratios are also displayed as each measurement is processed. (Clock phase and frequency are modeled when "raw" CA, P1 or P2 measurements are processed, and are not modeled when Single Differenced (SD) measurements are processed.)
Time Update Dynamically displays estimates of the GPS Receiver clock phase and clock frequency errors when clock phase and frequency are modeled state parameters. Data is displayed throughout the filer run, both while measurements are processed and during prediction intervals. (Clock phase and frequency are modeled when "raw" CA, P1 or P2 measurements are processed, and are not modeled when Single Differenced (SD) measurements are processed.)


Transponder Dynamic Report Styles
Style Description
Measurement Update Dynamically displays estimates of the transponder bias when the transponder bias is modeled as a state parameter. The range residuals, sigmas and data editing ratios are also displayed as each measurement that uses the transponder bias estimate is processed.
Time Update Dynamically displays estimates of the transponder bias when the transponder bias is modeled as a state parameter. Data is displayed throughout the filer run, both while measurements are processed and during prediction intervals.

You can select one or more of the above styles in the Dynamic Product Selector. The Simulation Wizard includes a page for selecting dynamic report styles.

ODTK 6.5