SetSwath
Set the properties of a Sensor Swath.
Syntax
SetSwath <SensorObjectPath> {Options}
Description
Use the SetSwath command to set the properties of a Sensor Swath
| {Options} | Description |
|---|---|
| ShowSwath {On | Off} | Turn on or off the display of the swath. |
| TimePeriod {TimeInterval} | Set the interval for displaying a Sensor's swath.
For valid {TimeInterval} values see Time Options. |
| RemoveAll | Turn off and remove the swath. |
| Color {Color} | Set the color of the swath. For valid {Color} options see Common Options. |
| LineWidth <LineWidth> | Set the line width for the swath. <LineWidth> should be between 1.0 and 10.0 |
| LineStyle {LineStyle} | Set the line style for the swath. {LineStyle} can be a name such as Solid, Dashed, Dotted, etc, or a number 0, 1, 2, etc. For all valid {LineStyle} options see Common Options. |
| ComputationalMethod {Numerical | Analytical} | Specify the method for computing the swath.
Numerical Computational Method is not valid if the Sensor uses a Custom Pattern. Analytical Computational Method is only valid if the parent of the Sensor is a Satellite and the Satellite has a Circular Orbit and the Satellite uses Nadir ECF Attitude and the Sensor is Nadir (Fixed) Pointing. |
| MinimumStep <Value> | Set the minimum step size in Connect time units. <Value> should be greater or equal to 0.001 seconds.
This option is valid only if ComputationalMethod is Numerical |
| MaximumStep <Value> | Set the maximum step size in Connect time units. <Value> should be greater or equal to 0.001 seconds.
This option is valid only if ComputationalMethod is Numerical |
| UseMaximumCone {On | Off} | Specify whether to use the maximum cone.
This option is valid only if ComputationalMethod is Numerical |
| ScatteringTolerance <Value> | Set the scattering tolerance value in degrees. <Value> should be between 0.0 and 180.0 degrees.
This option is valid only if ComputationalMethod is Numerical |
| CurvatureTolerance <Value> | Set the curvature tolerance value in degrees. <Value> should be between 0.0 and 180.0 degrees.
This option is valid only if ComputationalMethod is Numerical |
Examples
To turn on the swath for Sensor1, and set the width to 2 and the style to dotted:
Change the color of the swath for Sensor1 to yellow and set a time interval:
Set additional values for the sensor swath:
Return message
Group membership
This command belongs to the following group(s):
Version
10