ITU-R S580 Antenna
An pattern modeled on equations given in ITU-R S580.
This antenna uses a polar coordinate system.
| Parameter | Description |
|---|---|
| Design Frequency |
The frequency of the antenna. For an embedded antenna on a receiver, transmitter or radar, this value corresponds to the Frequency entered on the Model Specs tab for the transmitter or receiver and the Transmitter Specs tab for the Radar. For an antenna linked to a receiver, transmitter, or radar, the Antenna Design Frequency value gets overridden by the Frequency value set on the Model Specs tab for the transmitter or receiver, and the on the Transmitter Specs tab for the Radar. However, when computing the antenna's gain matrix (or a link budget, etc.) from one of the objects linking to the antenna, that other object's frequency settings override the antenna's Design Frequency setting. |
| Main-lobe Gain | The maximum gain of the main lobe of the antenna pattern. |
| Efficiency | The aperture efficiency of the antenna. This value accounts for all the losses between the incident wavefront and the output of the antenna. This field is not required by the ITU-R recommendations. It is, however, provided for consistency with other antenna types and to facilitate accounting for any antenna losses. By default, the efficiency is set to a value of 100% or zero loss. |
| Diameter | Diameter of the dish. |
| Use Main-Lobe Model |
The main lobe (φ ranges between the value 0 and φmin) is not defined for this antenna model. If Use Main-Lobe Model is not selected, this range of φ is modeled as a constant or flat gain at the Main-lobe Gain value. If selected, this range of φ is modeled using the ITU Radio Regulations Appendix 8 main lobe model. |
| Side-lobe Mask Level | Sets the level of the side lobe mask. This value is either an absolute level or, if Relative to Mainlobe is enabled, a value that is defined relative to the maximum off the main-lobe. |
Visit AGI.com