CommQuery
Return information about a transmitter or receiver (Deprecated Command)
Syntax
CommQuery <CommObjectPath> [{QueryType}]
ATTENTION: THIS COMMAND IS DEPRECATED and has been replaced by:
Receiver_RM, Transmitter_RMDescription
This command was deprecated in STK 9, it should no longer be used. This command has been replaced by the Receiver_RM and Transmitter_RM commands.
The CommQuery command returns data for the specified transmitter or receiver. Valid values for {QueryType} are ModelName.
Example
To obtain the model name of the cRc receiver:
CommQuery */Satellite/CircSat/Receiver/cRc ModelName
ReturnMessage
If activated, Connect returns a message containing the specified receiver's model name:ACK
COMMQUERY 18
Multibeam Receiver
Example
To obtain the model name of the Tm transmitter:
CommQuery */Satellite/SunSyncSat/Transmitter/Tm ModelName
ReturnMessage
If activated, Connect returns a message containing the specified transmitter's model name:ACK
COMMQUERY 20
Medium Retransmitter
Group Membership
This command belongs to the following group(s):
Version
9.0
Visit AGI.com