Description | Example | Return Message | Group

ShowUnits

Get the current units of measure being used for entering data via the interface, displaying data in reports or entering data via the Connect socket (Deprecated Command)

Syntax

ShowUnits <ScenarioPath> {UnitLevel}

ATTENTION: THIS COMMAND IS DEPRECATED and has been replaced by:

Units_Get

Description

This command was deprecated in STK 10.1, it should no longer be used. This command has been replaced by the Units_Get command.

The ShowUnits command returns the units of measure being used at the {UnitLevel} specified.

{UnitLevel} can be:

{UnitLevel}	Value
Connect	Returns units being used to transfer data during the Connect session. Units only include date, distance, time, latitude and longitude.
GUI	Returns default units set for the current scenario
Report	Returns units used to generate and display reports
ConnectReport	Returns units that are used to generate and display reports that are created via Connect.

Example

To obtain the units being used for the current Connect session:

ShowUnits * Connect

ReturnMessage

If you requested a list of units to be used for transferring data during the current Connect session, Connect would return a message similar to:

ACK
SHOWUNITS 70
DistanceUnit Meter;
TimeUnit second;
DateFormat Gregorian;
Latitude Degrees;
Longitude Degrees;

Group Membership

This command belongs to the following group(s):

Scenarios

Deprecated Commands

Version

10.1