VO CovAttributes
Display 3D coverage graphics for a coverage definition object
Syntax
VO <ObjectPath> CovAttributes {DisplayOption} <Value> [{DisplayOption} <Value>...]
Description
The VO CovAttributes command allows you to define the display of 3D coverage graphics for a coverage definition object.
{DisplayOptions} can be specified in any order, and any number of {DisplayOptions} can be used in a single command.
{DisplayOption} and <Value> can be:
| {DisplayOption} | <Value> | Description |
|---|---|---|
| ShowStatic | On | Static graphics display. |
| Off | Static graphics do not display. | |
| ShowAnimation | On | Animation graphics display. |
| Off | Animation graphics do not display. | |
| StaticTranslucency | <TranslucencyValue> | Sets the translucency of filled points in the 3D coverage grid for static and/or animation graphics. Translucency sets the amount of light to pass through an object but diffusing it so that objects aren't clearly visible. <TranslucencyValue> ranges from 0 (opaque) to 100 (completely transparent). |
| AnimationTranslucency | ||
| StaticSize | <SizeValue> | Sets the size of unfilled points in the 3D coverage grid static and/or animation graphics. <SizeValue> is a number greater than 0 representing the size of the points in pixels. |
| AnimationSize | ||
| AutoGranularity | {On | Off} | Enter on to use the grid point granularity for fill point granularity. If Off, then Granularity will be used. |
| Granularity | <Value> | Angular distance between intermediate points created for filled points. This can be used to improve smoothness of filled area. Enter a value between 0.0001 and 20.0 degrees. |
| ShowAtAltitude | {On | Off} | Enter On to display graphics at altitude. |
| DrawAtAltMode | {Front | Back| FrontAndBack} | If ShowAtAltitude is on then enter DrawAtAltMode to indicate the method of drawing filled graphics, i.e. which 'side' of the fill to show. |
Example
To add turn on the animation 3d graphics for FigureOfMerit1 and set the animation point size to 3 pixels:
VO */CoverageDefinition/CoverageDefinition1 ShowAnimation On AnimationSize 3
ReturnMessage
Group Membership
This command belongs to the following group(s):
Version
11.1.1
Visit AGI.com