Following are listings of Connect commands added or changed in the designated STK release version:
| Command |
Format |
Description |
Version |
| 3DTiles
|
3DTiles <ScenarioPath> Analysis {AddTileset | RemoveTileset} <Option> |
New command for version 12; for 12.7, added the PATH option
|
12 |
| CalculationTool Scalar Calculation
|
CalculationTool <ScenarioPath> <ParentObject> {Action} {"Scalar Calculation" | "Scalar CalculationTemplate"} <ComponentName> [{ScalarCalculationType} <TypeParams>] |
Adda a Dot Product for the Scalar Calculation. |
12 |
| Chains
|
Chains <ObjectPath> {ChainOption} [<Parameters>] |
Added the Routing File information and two examples of how to use it. |
12 |
| EOIR
|
EOIR <VehPath> {Option} <Parameters> |
Added the Add and Remove target examples. |
12 |
| EOIR CloudData
|
EOIR <ScenarioPath> CloudData {Option} <CloudLabel> [<Parameter>] |
New command. |
12 |
| EOIR SetAtmosphere Clouds
|
EOIR <ScenarioPath> SetAtmosphere Clouds {On | Off} |
New command. |
12 |
| EOIR SetAtmosphere Mode
|
EOIR <ScenarioPath> SetAtmosphere Mode {0 | 1 | 2} |
New command. |
12 |
| ForceRecomputeOnLoad
|
ForceRecomputeOnLoad <ScenarioPath> {Options} |
New Command. |
12 |
| Graphics BackgroundImage
|
Graphics <ScenarioPath> BackgroundImage {Options} |
Removed HillShade option and added Dark Gray and Road Gray options to BingMapsType. Removed BingMapsServer "<ServerName>" option since this option is no longer exposed in the UI. |
12 |
| LightingMaxStep_R
|
LightingMaxStep_R <ObjectPath> |
New Command. |
12 |
| Parallel
|
Parallel <AppOrScenPath> {ParallelOption} |
Added the CompressVDF and SaveInBinary options. |
12 |
| Parallel_RM
|
Parallel_RM <AppOrScenPath> {ParallelOption} |
Added the CompressVDF and SaveInBinary fields. |
12 |
| SaveComputedData
|
SaveComputedData <ScenarioPath> {Options} |
New Command. |
12 |
| TE_AnalysisObject
|
TE_AnalysisObject <ScenarioPath> Add {<Parameters>}
TE_AnalysisObject <ScenarioPath> Delete Ownship "<OwnshipName>" SourcePath "<FilePath>"
|
Added the Access parameter. Added the Reload command. |
12 |
| TE_AssociatedObject
|
TE_AssociatedObject <ScenarioPath> Add {<Parameters>}
TE_AssociatedObject <ScenarioPath> Delete|Reload Ownship "<OwnshipName>" SourcePath "<FilePath>"
|
Added the Reload command. |
12 |
| TE_QuickLooks
|
TE_QuickLooks <ScenarioPath> {Create | Set | Graph | GraphMulti | GraphXY | LinkLine | Vector | Angle | Plane} <Parameters> |
Revised the GraphXY option to indicate that the only supported graph is BodyAzEl. |
12 |
| VO SetVectorGeometry
|
VO <ObjectPath> SetVectorGeometry {Option} <Parameters> [WindowID <WinNumber>] |
Added ability to load color intervals from an interval file. |
12 |
| VO TerrainAndImagery
|
VO <ScenarioPath> TerrainAndImagery {Options} <Parameters> |
Removed HillShade option and added Dark Gray and Road Gray options to BingMaps. |
12 |
| Command |
Format |
Description |
Version |
| ACAT
|
ACAT <AdvCatObjPath> {CalculateOptions} <Parameters> |
Allow user to enter an SDF file path. |
11.6 |
| ACAT RelationFile
|
ACAT <AdvCatObjPath> RelationFile {On | Off | "<FilePath>"} |
Allow user to enter an SDF file path. |
11.6 |
| ACAT SSCFile
|
ACAT <AdvCatObjPath> SSCFile {On | Off | "<FilePath>"} |
Allow user to enter an SDF file path. |
11.6 |
| CAT
|
CAT <ObjectPath> {Option} |
Allow user to enter an SDF file path for Database and XRefDatabase. |
11.6 |
| Cov Access
|
Cov <ObjectPath> Access {ComputeOption} [<Parameters>] |
Allow user to enter an SDF file path for Export. |
11.6 |
| Cov FOMDefine
|
Cov <FOMObjectPath> FOMDefine {Satisfaction | InvalidData | Limits | Definition} <Parameters> |
Allow user to enter an SDF file path for AssetUncertainty. |
11.6 |
| Cov Grid
|
Cov <CovDefnObjectPath> Grid {GridOption} <Parameters> |
Allow user to enter an SDF file path for Custom Region. |
11.6 |
| CreateTLEFile
|
CreateTLEFile <ScenarioPath> {Source} "<TLEFilePath>" [{Options}] {SearchParameters}
|
Allow user to enter an SDF file path. |
11.6 |
| Database
|
Database <ScenarioPath> {DBOption} |
Allow user to enter an SDF file path for SetDefault or SetAuxiliary. |
11.6 |
| DeckAccess
|
DeckAccess <FromObjectPath> {{TimeInterval} | UseObjInterval} {TargetDeckType} "<TargetDeck>" {SortObj | SortTime} {OutReport | OutFile "<OutputFilePath>"} [{OptionalParameters}] |
Allow user to enter an SDF file path for TargetDeck and OutFile. |
11.6 |
| Define (Planet) |
Define <PlanetObjectPath> {Method} <Parameters> |
Allow user to enter an SDF file path. |
11.6 |
| ExportDataFile
|
ExportDataFile <ObjectPath> {FileType} "<FilePath>" [{Options}] |
You can now use TimeStep when exporting position/velocity covariance information. You can enter an SDF file path. |
11.6 |
| GIS Export
|
GIS <ScenarioPath> Export "<ShapefilePath>" {ShapeType} [Object <ObjectPath> | ObjectWithOption <ObjectPath> objectOption] ... [{ExportOptions}] |
Allow user to enter an SDF file path. |
11.6 |
| GIS Pattern
|
GIS <ScenarioPath> Pattern "<ShapefilePath>" <SensorObjectPath> |
Allow user to enter an SDF file path. |
11.6 |
| GIS Swath
|
GIS <ScenarioPath> Swath "<ShapefilePath>" <SensorObjectPath> |
Allow user to enter an SDF file path. |
11.6 |
| Graphics Boresight (Comm) |
Graphics <ObjectPath> Boresight {On | Off} [{Color} {MarkerType}] |
Allow user to enter an SDF file path Marker file. |
11.6 |
| Graphics Boresight (Sensor) |
Graphics <SensorObjectPath> Boresight {On | Off} [{Color} {MarkerType}] |
Allow user to enter an SDF file path for Marker file. |
11.6 |
| Graphics ImageInlay
|
Graphics <ScenarioPath> ImageInlay "<FilePath>" {ImageOption} <Value> [{ImageOption} <Value>...] |
Allow user to enter an SDF file path. |
11.6 |
| Graphics Nightlights
|
Graphics <ScenarioPath> Nightlights {DisplayOptions} |
Allow user to enter an SDF file path for ImageFile. |
11.6 |
| Graphics ObjectLine
|
Graphics <ScenarioPath> ObjectLine {Action} FromObj <TruncObjectPath1> ToObj <TruncObjectPath2> [{LineOptions}] |
Allow user to enter an SDF file path for LoadIntervals. |
11.6 |
| HPOP Drag
|
HPOP <ObjectPath> Drag {DragState} <Coeff> <AreaMassRatio> {"AtmDensModel"} [{LowAltAtmDensityMdl} <DensityBlendingAltRange>] |
Add new {"AtmDensModel"} option, "<DensityModelPlugin>". Allow user to enter an SDF file path for Density Model. |
11.6 |
| HPOP Force
|
HPOP <ObjectPath> Force {ForceModel} <ModelParameters> |
Allow user to enter an SDF file path. |
11.6 |
| HPOP Integrator
|
HPOP <ObjectPath> Integrator {IntegratorOption} <Parameters> |
Add AllowPosVelCovInterp integration option. |
11.6 |
| LaserCAT
|
LaserCAT <ObjectPath> {AvoidanceOptions} <Parameters> |
Allow user to enter an SDF file path for Database and AtRiskFile. |
11.6 |
| LaunchWindow
|
LaunchWindow <ObjectPath> {Option} |
Allow user to enter an SDF file path for Database and XRefDatabase. |
11.6 |
| MapDetails
|
MapDetails <ScenarioPath> {DetailOption} <Parameters> |
Allow user to enter an SDF file path for Clouds. |
11.6 |
| PatternTool
|
PatternTool <SensorObjectPath> "<DateTime>" "<FilePath>" {Method}
<Parameters> |
Allow user to enter an SDF file path for the Area Target File and output pattern file. |
11.6 |
| Point Targeted
|
Point <SensorObjectPath> Targeted {OrientMethod} <MethodData> |
Allow user to enter an SDF file path for the TruncObjectPath. |
11.6 |
| RFI
|
RFI <ObjectPath> {RFIOption} <Parameters> |
Allow user to enter an SDF file path for Database and RFIDatabase. |
11.6 |
| ReportCreate
|
ReportCreate <ObjectPath> ({Option} <Value>)... |
Allow user to enter an SDF file path for Save, Export, or Intervals. |
11.6 |
| ReportStyle
|
ReportStyle <ScenarioPath> Load "<FilePath>"
|
Allow user to enter an SDF file path for report style. |
11.6 |
| SaveTerrainMaskDataInBinary
|
SaveTerrainMaskDataInBinary <FacObjectPath> {Yes | No}
|
New command. |
11.6 |
| TE_Mapping
|
TE_Mapping <ObjectPath> Import File "<FilePath>" |
New command. |
11.6 |
| TE_SensorQuickLooks
|
TE_SensorQuickLooks <ScenarioPath> {Action} From <SensorName> To <TargetName> {Options} |
Updates to command Options. |
11.6 |
| TE_TimeComponent
|
TE_TimeComponent <ObjectPath> {Type} Name "<Name>" AnalysisObject "<Name>" <Parameters> |
New command. |
11.6 |
| Track
|
Track <MTOObjectPath> {TrackOption} |
Document the InputDataVGTSystem option. Allow user to enter an SDF file path for the interval file. |
11.6 |
| VO ArticulationFile
|
VO <ObjectPath> ArticulationFile <Options> |
Allow user to enter an SDF file path for the articulation file. |
11.6 |
| VO WaypointAttributes
|
VO <VehObjectPath> WaypointAttributes {WaypointOptions} ({GfxOption} <Parameter>)... |
Allow user to enter an SDF file path for an external image. |
11.6 |
| Command |
Format |
Description |
Version |
| AttitudeSegment
|
AttitudeSegment <ObjectPath> {Add | Delete | Modify} {SegmentType} <Parameters> |
Allow user to enter an SDF file path for a File Segment. |
11.5 |
| CalculationTool
|
CalculationTool <ScenarioPath> {Options} |
Add UserDescription option. Allow user to enter an SDF file path for Import. |
11.5 |
| CalculationTool Condition Set
|
CalculationTool <ScenarioPath> <ParentObject> {Action} {"Condition Set" | "Condition SetTemplate"} <ComponentName> [{ConditionType} <TypeParams>] |
ConsiderAbove and ConsiderBelow options will be ignored is Scalar dimension is Angle. |
11.5 |
| Define (Sensor) |
Define <SensorObjectPath> {Type} <TypeData> |
Allow user to enter an SDF file path for the Custom File. |
11.5 |
| DisplayTimes
|
DisplayTimes <ObjectPath> {DisplayOption} {Action} [<Parameters>] |
DisplayTimes command is now available for antennas, receivers, and transmitters. Allow user to enter an SDF file path for Load. |
11.5 |
| GetAnimationData
|
GetAnimationData <ScenarioPath> {Option} |
Updated documentation with missing options. |
11.5 |
| GetDspTimes
|
GetDspTimes <ObjectPath> {DataOption} |
GetDSPTimes command is now available for antennas, receivers, and transmitters. |
11.5 |
| Graphics CustomIntervals (Vehicles) |
Graphics <ObjectPath> CustomIntervals {Action} [<Parameters>] |
Allow user to enter an SDF file path for the File type Point. |
11.5 |
| Graphics RadarCrossSection
|
Graphics <ObjectPath> RadarCrossSection {Option} <Parameters> |
Newly documented command. |
11.5 |
| ImportAlmanacFile
|
ImportAlmanacFile <ScenarioPath> "<FilePath>" ID {All | <IDNumber>} [{ImportOption} <Value> ...] |
Allow user to enter an SDF file path for the File. |
11.5 |
| ImportTLEFile (Satellites) |
ImportTLEFile <ScenarioPath> "<FilePath>" [{ImportOption} <Value> {ImportOption} <Value>...] |
Allow user to enter an SDF file path for the File. |
11.5 |
| OrbitWizard
|
OrbitWizard <VehObjectPath> {Type} [{Options}] |
Allow user to enter an SDF file path for the File. |
11.5 |
| Point External
|
Point <SensorObjectPath> External "<FilePath.sp>" |
Allow user to enter an SDF file path for the File. |
11.5 |
| RecordMovie2D
|
RecordMovie2D <ScenarioPath> {MovieOption} <Value> [{MovieOption} <Value>...] |
New command. |
11.5 |
| RecordMovie2D_R
|
RecordMovie2D_R <ScenarioPath> {Options} |
New command. |
11.5 |
| RecordMovie3D
|
RecordMovie3D <ScenarioPath> {MovieOptions} |
New command. |
11.5 |
| SDF
|
SDF <ApplicationPath> {Option} [<Parameters>] |
Remove UseGuestAccess option. |
11.5 |
| SDF_RM
|
SDF_RM <ApplicationPath> {Option} |
Remove GetUsingGuestAccess option. |
11.5 |
| SetAttitude File
|
SetAttitude <VehObjectPath> File "<FilePath>" [<Blocking>] [{SaveFile | SaveLocally}] |
Allow user to enter an SDF file path for the Filename. |
11.5 |
| SetAttitude Target
|
SetAttitude <VehicleObjectPath> Target {TargetOption} [<Parameters>] |
Allow user to enter an SDF file path for the Times Load. |
11.5 |
| SetAzElMask (Sensor) |
SetAzElMask <SensorObjectPath> {UseOption} [<Parameters>] |
Allow user to enter an SDF file path for the Mask File. |
11.5 |
| SetConstraint (Facility, Place & Target) |
SetConstraint <ObjectPath> {ConstraintName} <Parameters> |
Allow multiple ObjectExclusionAngle constraints. |
11.5 |
| SetPropagator File
|
SetPropagator <ObjectPath> File {Propagator} "<FilePath>" [{NoProp | {TimeInterval}}]
|
Allow user to enter an SDF file path for the File. |
11.5 |
| SetState 11Parameter
|
SetState <SatObjectPath> 11Parameter <Options> |
Allow user to enter an SDF file path for the File. |
11.5 |
| SetState FromFile
|
SetState <VehObjectPath> FromFile "<FilePath>" [{Options}] |
Allow user to enter an SDF file path for the File. |
11.5 |
| SetState GPS
|
SetState <SatObjectPath> GPS <PRN> [{SetStateOption} <Value> ...] |
Allow user to enter an SDF file path for Catalog or SourceFile. |
11.5 |
| SetState SGP4 (Satellites) |
SetState <SatObjectPath> SGP4 {NoProp | {TimeInterval}} <StepSize> <SSCNumber>
TLESource {Automatic | DefineElements} [<Parameters>]
|
Allow user to enter an SDF file path for Source. |
11.5 |
| SetState SP3
|
SetState <SatObjectPath> SP3 <Options> |
Allow user to enter an SDF file path for the File. |
11.5 |
| SetState SPICE
|
SetState <SatObjectPath> SPICE <Options> |
Allow user to enter an SDF file path for the File. |
11.5 |
| SoftVTR2D
|
SoftVTR2D <ScenarioPath> {SoftVTROption} <Value> [{SoftVTROption} <Value>...] |
This command has been replaced by the RecordMovie2D command. |
11.5 |
| SoftVTR2D_R
|
SoftVTR2D_R <ScenarioPath> {Options} |
This command has been replaced by the RecordMovie2D_R command. |
11.5 |
| SoftVTR3D
|
SoftVTR3D <ScenarioPath> {SoftVTROptions} |
This command has been replaced by the RecordMovie3D command. |
11.5 |
| SpatialTool
|
SpatialTool <ScenarioPath> {Options} |
Add UserDescription option. Allow user to enter an SDF file path for Import. |
11.5 |
| SpatialTool Spatial Calculation
|
SpatialTool <ScenarioPath> <ParentObject> {Action} {Spatial Calculation | Spatial CalculationTemplate} <Spatial CalculationName> [{Spatial CalculationType} <Spatial CalculationTypeParams>] |
Allow user to enter an SDF file path for the File type Spatial Calculation. |
11.5 |
| TE_SegmentDefinition
|
TE_SegmentDefinition <ScenarioPath> {Add | Import} <Parameters> |
Added Import action. |
11.5 |
| TE_TrackComparison
|
TE_TrackComparison <ScenarioPath> {Add | Export} <Parameters> |
Add Export option. |
11.5 |
| TLEFileOptions
|
TLEFileOptions <SatObjectPath> (AddFile "<FilePath>")...
|
Allow user to enter an SDF file path for the File. |
11.5 |
| TimeTool
|
TimeTool <ScenarioPath> {Options} |
Add UserDescription option. Allow user to enter an SDF file path for Import. |
11.5 |
| TimeTool Interval List
|
TimeTool <ScenarioPath> <ParentObject> {Action} {"Interval List" | "Interval ListTemplate"} <ComponentName> [{IntervalListType} <TypeParams>] |
Allow user to enter an SDF file path for the File type Spatial Calculation. |
11.5 |
| VO OpenGLInitParms
|
VO <ApplicationPath> OpenGLInitParms {Options} <Parameters> |
Replace ColladaModelsDisabled option with ForceMdlModels. |
11.5 |
| VO_R RecordMovie3D
|
VO <ScenarioPath> RecordMovie3D {Options} |
New command. |
11.5 |
| VO_R SoftVTR3D
|
VO <ScenarioPath> SoftVTR3D {Options} |
This command has been replaced by the VO_R RecordMovie3D command. |
11.5 |
| VectorTool
|
VectorTool <ScenarioPath> {Options} |
Add UserDescription option. Allow user to enter an SDF file path for Import. |
11.5 |
| VectorTool Axes
|
VectorTool <ScenarioPath> <ParentObject> {Action} {Axes | AxesTemplate} <AxesName> [{AxesType} <AxesTypeParams>] |
Allow user to enter an SDF file path for the File type Axes. |
11.5 |
| VectorTool Vector
|
VectorTool <ScenarioPath> <ParentObject> {Action} {Vector | VectorTemplate} <VectorName> [{VectorType} <VectorTypeParams>] |
Allow user to enter an SDF file path for the File type Vector. |
11.5 |
Following are listings of Connect commands added or changed in the designated STK release version:
Following are listings of Connect commands added or changed in the designated STK release version:
Following are listings of Connect commands added or changed in the designated STK release version:
| Command |
Format |
Description |
Version |
| AllInstanceNames
|
AllInstanceNames <ApplicationPath> [IncludeAccess] [<Delimiter>] |
Add the IncludeAccess and <Delimiter> keywords. |
11 |
| CalculationTool_R
|
CalculationTool_R <ScenarioPath> {Option} [<Parameters>] |
Add ValueOnly and RateOnly options; add ScalarMinMax and ScalarSTDMean options. |
11 |
| Comm CommSystem AccessOptions
|
Comm <CommSysObjectPath> CommSystem AccessOptions <Parameters> |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem Clear
|
Comm <CommSysObjectPath> CommSystem Clear |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem Compute
|
Comm <CommSysObjectPath> CommSystem Compute [NOW] |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem IFSources
|
Comm <CommSysObjectPath>
CommSystem IFSources {Action} <TruncObjectPath> |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem Interference
|
Comm <CommSysObjectPath> CommSystem Interference {Yes | No} [{PFDRefBandwidth}] |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem Interval
|
Comm <CommSysObjectPath> CommSystem Interval {UseScenarioTime} <StepSize> [{TimeInterval}] |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem LinkDefinition
|
Comm <CommSysObjectPath> CommSystem LinkDefinition {Receive | Transmit} {LinkCriteria} |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem Receive
|
Comm <CommSysObjectPath> CommSystem Receive {Action} <TruncObjectPath> |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem SaveMode
|
Comm <CommSysObjectPath> CommSystem SaveMode {Option} |
Replaced this command with CommSystem command. |
11 |
| Comm CommSystem Transmit
|
Comm <CommSysObjectPath> CommSystem Transmit {Action} <TruncObjectPath> |
Replaced this command with CommSystem command. |
11 |
| CommSystem
|
CommSystem <CommSystemPath> {Options} [<Parameters>] |
New command. |
11 |
| CommSystem_RM
|
CommSystem_RM <CommSystemPath> GetValue [<AttributePath>] |
New command. |
11 |
| GIS Import
|
GIS <ScenarioPath> Import "<ShapefilePath>" {ObjectType} [<ImportOptions>] |
Add ImportTo option. |
11 |
| GenFluxHistory
|
GenFluxHistory <ScenarioPath> ({FluxOption} <Value>)... |
The CSSI predicts file replaces older obsolete solar flux predicts files. |
11 |
| Graphics Contours (Comm & Radar) |
Graphics <ObjectPath> Contours {ContourType} {ShowGfxState} {RelMaxState} |
Add SpectralFluxDensity to valid Contour types. |
11 |
| Graphics FOMContours
|
Graphics <ObjectPath> FOMContours {GfxType} {ContourOption} [<Parameters>] |
Add LineWidth, LineStyle, Marker, ShowMarkerHighlight, and ShowGfxOnTrack options. |
11 |
| MissionModeler Procedure
|
MissionModeler <AircraftObjectPath> Procedure {ProcedureOption} <Parameters> |
Add documentation of time options. |
11 |
| ObjectBrowser
|
ObjectBrowser <ApplicationPath> {Options} |
Newly documented command. |
11 |
| Point AlongVector
|
Point <SensorObjectPath> AlongVector "<AlignmentVector>" "<ConstraintVector>" [<ClockAngleOffset>] |
New command. |
11 |
| SetAttitude Profile
|
SetAttitude <ObjectPath> Profile {ProfileType} <Parameters> |
Add IIF, IIR, IIFNominal, QZSS and GalileoIOV to GPS Model Type. Change IIAGYM95 Model Type to IIA. |
11 |
| SpatialTool Volume Grid
|
SpatialTool <ScenarioPath> <ParentObject> {Action} {Volume Grid | Volume GridTemplate} <Volume GridName> [{Volume GridType} <Volume GridTypeParams>] |
New command. |
11 |
| SpatialTool_R
|
SpatialTool_R <ScenarioPath> {Option} [<Parameters>] |
New command. |
11 |
| SpatialTool_RM
|
SpatialTool_RM <ScenarioPath> {Option} [<Parameters>] |
New command. |
11 |
| Terrain
|
Terrain <ScenarioPath> {Action} <Parameters> |
Add TerrainServer commands. |
11 |
| Terrain_RM
|
Terrain_RM <ScenarioPath> TerrainServer {Option} |
New command. |
11 |
| VO View
|
VO <ScenarioPath> View {Options} |
Add PanOnCentralBodies option to Rotate. |
11 |
| VO VolumetricGfx
|
VO <VolumetricPath> VolumetricGfx {{GfxOptions} | {Legend Options}} |
New command. |
11 |
| VO_R VisualTerrainCurrentServer
|
VO_R <ScenarioPath> VisualTerrainCurrentServer |
Replaced this command with TerrainServer_RM command. |
11 |
| VO_RM VisualTerrainServers
|
VO_RM <ScenarioPath> VisualTerrainServers |
Replaced this command with TerrainServer_RM command. |
11 |
| VO_RM VisualTerrainTilesets
|
VO_RM <ScenarioPath> VisualTerrainTilesets [Server <ServerName>] |
Replaced this command with TerrainServer_RM command. |
11 |
| Command |
Format |
Description |
Version |
| Animate
|
Animate <ScenarioPath> {AnimateOption} <Parameters> |
Add the Refresh option. |
10.1 |
| CalculationTool_RM
|
CalculationTool_RM <ScenarioPath> {Option} [<Parameters>] |
Add Names option. |
10.1 |
| Convert OrbitPointMotion
|
Convert <ScenarioPath> OrbitPointMotion [Precision <Value>] {FromElementsType} <Elements> {ToElementsType} |
Add Precision option. |
10.1 |
| DefaultTrack3d
|
DefaultTrack3d <MTOObjectPath> {TrackOptions} |
Add Articulation options. |
10.1 |
| GISOverlay
|
GISOverlay <ScenarioPath> "STK Overlay" {Add | Delete} "<OverlayFilepath>"
|
Remove obsolete options from the command. |
10.1 |
| GraphCreate
|
GraphCreate <ObjectPath> ({Option} <Value>)... |
Add Title and SubTitle options. |
10.1 |
| Graphics (Radar) |
Graphics <RdrObjectPath> {GfxType} {GfxOption} [{State}] [<Parameters>] |
Added the Clutter option. |
10.1 |
| Graphics ExportBlockContours
|
Graphics <FOMObjectPath> ExportBlockContours {Option} <Parameters> [{Option} <Parameters>...] |
New command. |
10.1 |
| Graphics ExportSmoothContours
|
Graphics <FOMObjectPath> ExportSmoothContours {Option} <Parameters> [{Option} <Parameters>...] |
New command. |
10.1 |
| Graphics SetDynamicState
|
Graphics <ObjectPath> SetDynamicState IsDynamic {On | Off} |
Add Sensor object. |
10.1 |
| Graphics TimeComponents (Vehicles) |
Graphics <ObjectPath> TimeComponents {Action} [<Parameters>] |
Add Priority option, and IntervalList option. |
10.1 |
| Graphics_R TimeComponents
|
Graphics_R <ObjectPath> TimeComponents {Option} |
New command. |
10.1 |
| MapAnnotation_RM
|
MapAnnotation_RM <ScenarioPath> {Option} [WindowID <WinNumber>] |
New command. |
10.1 |
| RCS
|
RCS <ObjectPath> {Options} <Parameters> |
Updated to use attributes. |
10.1 |
| RCS_RM
|
RCS_RM <ObjectPath> GetValue [<AttributePath>] |
New command. |
10.1 |
| Radar
|
Radar <RdrObjectPath> {Options} <AttributePath> [<Value>] [<Unit>] |
New command. |
10.1 |
| Radar_RM
|
Radar_RM <ObjectPath> GetValue [<AttributePath>] |
New command. |
10.1 |
| SetConstraint (Radar) |
SetConstraint <RdrObjectPath> {ConstraintName} <Parameters> |
Updated value ranges and availability for some constraints. |
10.1 |
| SetState Cartesian
|
SetState <VehObjectPath> Cartesian {Propagator} {NoProp | {TimeInterval}} <StepSize> {CoordSystem} "<OrbitEpoch>" <X> <Y> <Z> <vX> <vY> <vZ> ["<CoordEpoch>"] |
Add NoProp option. |
10.1 |
| SetState Classical
|
SetState <VehObjectPath> Classical {Propagator} {NoProp | {TimeInterval}} <StepSize> {CoordSystem} "<OrbitEpoch>" <SemiMajorAxis> <Eccentricity> <Inclination> <ArgOfPerigee> <RAAN> <MeanAnom> ["<CoordEpoch>"] |
Add the NoProp option. |
10.1 |
| SetState Equi
|
SetState <VehObjectPath> Equi {Propagator} {NoProp | {TimeInterval}} <StepSize> {CoordSystem} "<OrbitEpoch>" <SemimajorAxis> <h> <k> <p> <q> <MeanLon> {Retrograde | Posigrade} ["<CoordEpoch>"] |
Add the NoProp option. |
10.1 |
| SetState MixedSpherical
|
SetState <VehObjectPath> MixedSpherical {Propagator} {NoProp | {TimeInterval}} <StepSize> {CoordSystem} "<OrbitEpoch>" <Longitude> <GeodeticLatitude> <Altitude> <HorizontalFlightPathAngle> <FlightPathAzimuth> <Velocity> ["<CoordEpoch>"] |
Add the NoProp option. |
10.1 |
| SetState SimpleAscent (Launch Vehicle) |
SetState <LVObjectPath> SimpleAscent {StartTime} [{StopTime}] <StepSize> {Geodetic | Geocentric} <LaunchLat> <LaunchLon> {<LaunchAlt> | <LaunchRadius>} <BurnoutVelocity> <BurnoutLat> <BurnoutLon> {<BurnoutAlt> | <BurnoutRadius>} [NoProp] |
Add NoProp option. |
10.1 |
| SetState Spherical
|
SetState <VehObjectPath> Spherical {Propagator} {NoProp | {TimeInterval}} <StepSize> {CoordSystem} "<OrbitEpoch>" <RightAscension> <Declination> <Radius> <HorizontalFlightPathAngle> <FlightPathAzimuth> <Velocity> ["<CoordEpoch>"] |
Add the NoProp option. |
10.1 |
| SetState TLE (Satellites) |
SetState <SatObjectPath> TLE "<TLECard1>" "<TLECard2>" [{Options}] |
Add NoProp option. |
10.1 |
| ShowNames
|
ShowNames <ScenarioPath> [SubObjects [<ParentPath>]] [Class <ClassName>] |
Update syntax to allow showing specific class of an object. |
10.1 |
| TimeTool Collection of Interval Lists
|
TimeTool <ScenarioPath> <ParentObject> {Action} {"Collection of Interval Lists" | "Collection of Interval ListsTemplate"} <ComponentName> [{CollectionOfIntervalListsType} <TypeParams>] |
Add "Satisfaction" time component type. |
10.1 |
| TimeTool_RM
|
TimeTool_RM <ScenarioPath> {Option} [<Parameters>] |
Add Names option. |
10.1 |
| Timeline
|
Timeline <ScenarioPath> {Option} <Parameters> |
New command. |
10.1 |
| Units_Convert
|
Units_Convert <ScenarioPath> {Date | Unit} <Parameters> |
New command. |
10.1 |
| Units_SetConnect
|
Units_SetConnect <AppOrScenPath> {Default | Internal | {Dimension} {Unit}... } |
New command. |
10.1 |
| VO Attributes (Star) |
VO <StarPath> Attributes {AttributeOption} <Parameters> |
New command. |
10.1 |
| VO BearingBox
|
VO <ObjectPath> BearingBox {Keyword} <Value> [{Keyword} <Value>...] |
Add options to allow applicable values to be entered in Connect distance units instead of only meters. |
10.1 |
| VO BearingEllipse
|
VO <ObjectPath> BearingEllipse {Keyword} <Value> [{Keyword} <Value>...] |
Add options to allow applicable values to be entered in Connect distance units instead of only meters. |
10.1 |
| VO LineOfBearing
|
VO <ObjectPath> LineOfBearing {Keyword} <Value> [{Keyword} <Value>...] |
Add options to allow applicable values to be entered in Connect distance units instead of only meters. |
10.1 |
| VO Obscuration
|
VO <SensorObjectPath> Obscuration {ObscurationOption} <Parameters> |
Improve CentralBody option. |
10.1 |
| VO RefreshArticState
|
VO <ObjectPath> RefreshArticState |
New command. |
10.1 |
| VO_R MapID
|
VO_R <ScenarioPath> MapID [{Type} | Count [{Type}]] |
Add option to return MapIDs of a specified type. |
10.1 |
| VO_RM Annotation
|
VO_RM <ScenarioPath> Annotation {Option} [WindowID <WinNumber>] |
New command. |
10.1 |
| VectorTool_R
|
VectorTool_R <ScenarioPath> {Option} [<Parameters>] |
Add ConvertSystem and ConvertAxes options. |
10.1 |
| VectorTool_RM
|
VectorTool_RM <ScenarioPath> {Option} [<Parameters>] |
Add Names option. |
10.1 |
| Command |
Format |
Description |
Version |
| ACATProbability_R
|
ACATProbability_R <AdvCatObjPath> Primary <Name> Secondary <Name> TCA "<DateTime>" Method {Method} |
Update time options. |
10 |
| AER
|
AER <FromObjectPath> <ToObjectPath> [{AccessOptions}] |
Update time options. |
10 |
| AddAttitude AngVels
|
AddAttitude <ObjectPath> AngVels {TimeLimitInstant} <XAngVel> <YAngVel> <ZAngVel> |
Update time options. |
10 |
| AddAttitude CBFQuat
|
AddAttitude <ObjectPath> CBFQuat {StartTime} <Q1> <Q2> <Q3> <Q4> |
Update time options. |
10 |
| AddAttitude DCM
|
AddAttitude <ObjectPath> DCM {StartTime} <Value1> <Value2> <Value3> <Value4> <Value5> <Value6> <Value7> <Value8> <Value9> |
Update time options. |
10 |
| AddAttitude ECIYPR
|
AddAttitude <ObjectPath> ECIYPR {StartTime} {Sequence} <Yaw> <Pitch> <Roll> |
Update time options. |
10 |
| AddAttitude Euler
|
AddAttitude <ObjectPath> Euler {StartTime} {Sequence} <Angle1> <Angle2> <Angle3> |
Update time options. |
10 |
| AddAttitude EulerRates
|
AddAttitude <ObjectPath> EulerRates {StartTime} {Sequence} <AngleRate1> <AngleRate2> <AngleRate3> |
Update time options. |
10 |
| AddAttitude Profile
|
AddAttitude <ObjectPath> Profile [<ProfileName>] {StartTime} {ProfileType} <Parameters> |
Update time options; add VariableTimeSlew profile. |
10 |
| AddAttitude Quat
|
AddAttitude <ObjectPath> Quat {StartTime} <Q1> <Q2> <Q3> <Q4> |
Update time options. |
10 |
| AddAttitude YPR
|
AddAttitude <ObjectPath> YPR {StartTime} {Sequence} <Yaw> <Pitch> <Roll> |
Update time options. |
10 |
| AddTgtSched
|
AddTgtSched <SensorObjectPath> {ScheduleOption} [<Parameters>]
|
Update time options. |
10 |
| AddWaypoint
|
AddWaypoint <VehObjectPath> {AddMethod} <Parameters> [<TurnRadius>]
|
Update time options. |
10 |
| AnalysisWorkbench
|
AnalysisWorkbench <ApplicationPath> {Options}
|
New command. |
10 |
| AttCov FOMDefine
|
AttCov <AttFOMObjectPath> FOMDefine {Satisfaction | Limits | Definition} {FOMOption} <Parameters> |
Add Limits option. |
10 |
| AttCov Interval
|
AttCov <AttCovObjectPath> Interval {TimeInterval} |
Update time options. |
10 |
| CalculationTool Parameter Set
|
CalculationTool <ScenarioPath> <ParentObject> {Action} {"Parameter Set" | "Parameter SetTemplate"} <ComponentName> [{ParameterSetType} <TypeParams>] |
Add calculation component types. |
10 |
| ClearAccess
|
ClearAccess <FromObjectPath> <ToObjectPath> |
New command. |
10 |
| ClearAllAccess
|
ClearAllAccess <ApplicationPath> |
New command. |
10 |
| ComputeTerrainMaskAsNeeded
|
ComputeTerrainMaskAsNeeded <FacObjectPath> {On | Off} |
New command. |
10 |
| Cov Access (Single Object Coverage) |
Cov <ObjectPath> Access {ComputeOption} [<Parameters>] |
Update time options. Add Place object to single-object coverage. |
10 |
| Cov Asset
|
Cov <CovDefnObjectPath> Asset <AssetObjectPath> {Action} |
Add Place object to single-object coverage. |
10 |
| Cov Interval
|
Cov <CovDefnObjectPath> Interval {TimeInterval} |
Update time options. |
10 |
| Cov_RM Access (Single Object Coverage) |
Cov_RM <ObjectPath> Access Compute "<ReportStyle>" [{TimeIntervals} | UseObjectTimes [TimeStep <Value>]] |
Update time options. Add Place object to single-object coverage. |
10 |
| ExternalData
|
ExternalData <ObjectPath> {DataOption} [<Parameters>] |
Update time options. |
10 |
| GenerateTLE (Satellites) |
GenerateTLE <SatObjectPath> {Method} [{TimeInterval} <TimeStep>] "<TLEEpoch>" <SSCNumber> <MaxIterations> <Convergence> [{Routine}] [<NameOfNewSatellite>] [IntlDes <IntlDesignator>] [ElemNum <ElementNumber>] [BStar <BStarValue>] [Classification <Class>] [RevNumber <Value>] |
Update time options. |
10 |
| GetSTKVersion
|
GetSTKVersion <ApplicationPath> [Details | Platform] |
Updated value returned by Details option. Add Platform option. |
10 |
| Graphics (Chains & Constellations) |
Graphics <ObjectPath> {ChainGfxOption} [<Parameters>] |
Add Show option. |
10 |
| Graphics (Coverage) |
Graphics <CovDefnObjectPath> {GfxType} {DisplayOption} |
Add FillTranslucency and Show option. |
10 |
| Graphics (Figure of Merit) |
Graphics <FOMObjectPath> {GfxType} <Parameters> |
Add FillTranslucency and Show option. |
10 |
| Graphics (Single Object Coverage) |
Graphics <ObjectPath> {Static | Animation} {On | Off} {GFXOptions} |
Add Place object to single-object coverage. |
10 |
| Graphics AzElMask
|
Graphics <ObjectPath> AzElMask Type {Altitude | Range} [{AzElMaskOptions}] |
Add Place object. |
10 |
| Graphics BingMapsLogo
|
Graphics <ScenarioPath> BingMapsLogo {Options} |
New command. |
10 |
| Graphics ElevContours
|
Graphics <ObjectPath> ElevContours {AddMethod} [<Parameters>] |
Add FillTranslucency option. |
10 |
| Graphics FillTranslucency
|
Graphics <ObjectPath> FillTranslucency <Value> |
New command. |
10 |
| Graphics Projection
|
Graphics <SensorObjectPath> Projection {Option} |
Add Place object. |
10 |
| Graphics RangeContours
|
Graphics <ObjectPath> RangeContours {AddMethod} [<Parameters>] |
Add FillTranslucency option. |
10 |
| Graphics SetAccessGfx
|
Graphics <ObjectPath> SetAccessGfx {AccessObject} {AccessGfxOptions} |
Add Place object; add Show option. |
10 |
| Graphics SetAttrType (Vehicles) |
Graphics <ObjectPath> SetAttrType {AttributeType} |
Add TimeComponents attribute type. |
10 |
| Graphics SetColor
|
Graphics <ObjectPath> SetColor {Color} [{Item}] |
Add Place object. |
10 |
| Graphics Show
|
Graphics <ObjectPath> Show {On | Off} |
Command available for all objects. |
10 |
| Graphics TimeEvent
|
Graphics <SatObjectPath> TimeEvent {Action} [{EventType}] <EventParameters> |
Update time options. Add Import option. |
10 |
| Graphics WaypointAttributes
|
Graphics <VehObjectPath> WaypointAttributes {WaypointOptions} ({GfxOption} <Parameter>)... |
Update time options. |
10 |
| Graphics WindowState
|
Graphics <ObjectPath> WindowState {Options} |
Newly documented command. |
10 |
| GroundEllipse
|
GroundEllipse <VehObjectPath> {EllipseSetOptions} |
Update time options. |
10 |
| HeightAboveGround_R
|
HeightAboveGround_R <ObjectPath> |
Add Place as a valid object. |
10 |
| ImportFromDB
|
ImportFromDB <ScenarioPath> {Type} {Source} [{Options}] {SearchParameters}
|
Update time options, added Place object to Class option. |
10 |
| LaunchWindow_RM
|
LaunchWindow_RM <ObjectPath> Range <RangeVal> |
New command. |
10 |
| Lighting
|
Lighting <ScenarioPath> {LightingType} {DisplayOptions} |
New command. |
10 |
| MapAnnotation Add
|
MapAnnotation <ScenarioPath> Add <AnnotNum> {AnnotType} [<Parameters>] |
Add FillTranslucency option. |
10 |
| MapAttribs
|
MapAttribs <ScenarioPath> {AttributeType} {Attribute} {State} [<Color>] |
Add TextTranslucency and BackgroundTranslucency options. |
10 |
| Missile
|
Missile <ObjectPath> Trajectory {TimeValue} <StepSize> {LaunchOption} <LaunchParameters> {TrajOption} <Value> {ImpactOption} <ImpactParameter> |
Update time options. |
10 |
| OnLineOperations
|
OnlineOperations <ApplicationPath> {Options}
|
Add UseHTTPPersistantConn and UseSecureHTTPConn options. Add AutoFindClientCertificate and ClearClientCertificates options. |
10 |
| OnePointAccess
|
To Create/Remove: OnePointAccess <FromObjectPath> <ToObjectPath> {Option} where {Option} is Create or RemoveTo Compute: OnePointAccess <FromObjectPath> <ToObjectPath> {Option} [<Parameters>]
|
Update time options. |
10 |
| PassBreak (Satellites) |
PassBreak <SatObjectPath> {PassOption} [<Parameters>] |
Update time options. |
10 |
| Point Schedule
|
Point <SensorObjectPath> Schedule {ScheduleOption} [<MethodData>] |
Update time options. |
10 |
| Position (Facility, Place, Target & Area Target) |
Position <ObjectPath> [{Type}] [{TimeValue}] |
Add Place object. |
10 |
| Position (Vehicles) |
Position <ObjectPath>
[{TimeValue}] |
Update time options. |
10 |
| Position_RM
|
Position_RM <MTOObjectPath> {PosOptions} |
Update time options. |
10 |
| Propagate
|
Propagate <SatObjectPath> [{TimeInterval}] |
Update time options. |
10 |
| Prune
|
Prune <ObjectPath> {PruneOption} <Parameters> |
Update time options. |
10 |
| QuickReportAdd
|
QuickReportAdd <ScenarioPath> Name "<QuickReportName>" Type {RptType} Style "<StyleName>" Object <TruncObjPath> [FromObject <TruncObjPath>] |
New command. |
10 |
| SEET Radiation (Vehicle) |
SEET <VehiclePath> Radiation {RadOptions} |
Add DoseIntegrationStep and DoseReportStep options. |
10 |
| SetAnalysisTimePeriod
|
SetAnalysisTimePeriod <ScenarioPath> {TimeInterval} |
Update time options. |
10 |
| SetAnimation
|
SetAnimation <ScenarioPath> {AnimateOption} <Parameters> |
Update time options. |
10 |
| SetGreatArcStart
|
SetGreatArcStart <ObjectPath> {TimeValue} |
Update time options. |
10 |
| SetHeightAboveGround
|
SetHeightAboveGround <ObjectPath> <Height> |
Add Place object. |
10 |
| SetPosition (Facility, Place, Target & Area Target) |
SetPosition <ObjectPath> [{Type}] {CoordType} <Parameters> |
Add Place object. |
10 |
| SetPosition (Vehicles) |
SetPosition <ObjectPath> {PositionType} {TimeValue} <PositionData> |
Update time options. |
10 |
| SetPositionCov
|
SetPositionCov <VehObjectPath> [{PositionType}] {TimeValue} [<PositionData>] {CovarianceType} <CovarianceData> |
Update time options. |
10 |
| SetState
|
SetState <VehiclePath> {Method} <Parameters>
|
Add 11Parameter method option. |
10 |
| SetState (Missile) |
SetState <MissileObjectPath> {CoordinateType} TwoBody {TimeInterval} <StepSize> {CoordSystem} "<OrbitEpoch>" <CoordTypeParameters> ["<CoordEpoch>"] |
Update time options. |
10 |
| SetSwath
|
SetSwath <SensorObjectPath> {Options} |
Update time options; add ComputationalMethod option. |
10 |
| SetTerrainNormal
|
SetTerrainNormal <ObjectPath> {SurfaceNormal | Manual {Option} <Parameters>} |
Add Place object. |
10 |
| Surveillance
|
Surveillance <ObjectPath> {SurveillanceOptions} <Parameters> |
Add Place object. |
10 |
| TimeTool Time Instant
|
TimeTool <ScenarioPath> <ParentObject> {Action} {"Time Instant" | "Time InstantTemplate"} <ComponentName> [{TimeInstantType} <TypeParams>] |
Add time tool component types. |
10 |
| TimeTool_R
|
TimeTool_R <ScenarioPath> {Option} [<Parameters>] |
New command. |
10 |
| Transmitter
|
Transmitter <XmObjectPath> {Option} <AttributePath> [<Value>] [<Unit>] |
Describe updated attribute names. |
10 |
| Transmitter_RM
|
Transmitter_RM <ObjectPath> GetValue [<AttributePath>] |
Describe updated attribute names. |
10 |
| UseTerrain
|
UseTerrain <ObjectPath> {UseOption} |
Add Place object. |
10 |
| VO AddArticulation
|
VO <ObjectPath> AddArticulation {ArticulateOptions} |
Update time options. Add Place object. Add Force and AutoStartValue options. |
10 |
| VO AdvCATAttributes
|
VO <AdvCATObjPath> AdvCATAttributes {DisplayOption} <Value> [{DisplayOption} <Value>...] |
Add Show option. |
10 |
| VO Area
|
VO <ObjectPath> Area {AreaOption} <Parameters> |
Update time options. |
10 |
| VO AttFOMAttributes
|
VO <AttFOMObjectPath> AttFOMAttributes {Show {On | Off} | {AttFOMOptions}} |
Add Show option. |
10 |
| VO AttFOMContours
|
VO <AttFOMObjectPath> AttFOMContours {GfxType} {ContourOption} [<Parameters>] |
Add ShowUpToMaxOnly option. |
10 |
| VO AttitudeView
|
VO <ObjectPath> AttitudeView {AttitudeViewOption} <Parameters> |
Add Place object. |
10 |
| VO BorderWall
|
VO <ObjectPath> BorderWall {BorderWallOption} <Value> [{BorderWallOption} <Value>...] |
Add Place object. |
10 |
| VO CameraControl
|
VO <ScenarioPath> CameraControl {CameraOptions} |
Update time options. |
10 |
| VO ControlBox
|
VO <VehObjectPath> ControlBox {Keyword} <Value> [{Keyword} <Value>...] |
Add RefFrame keyword and update the keywords for setting the control box dimensions. |
10 |
| VO CovarPointContours
|
VO <VehObjectPath> CovarPointContours {CovarOption} <Parameters> |
Add Intervals Import option. |
10 |
| VO Ellipsoid
|
VO <VehObjectPath> Ellipsoid {Keyword} <Value> [{Keyword} <Value>...] |
New command. |
10 |
| VO FOMAttributes
|
VO <ObjectPath> FOMAttributes {DisplayOption} <Value> [{DisplayOption} <Value>...] |
The Granularity, TempFilesDir and PixelsPerDeg options are no longer valid. |
10 |
| VO ImageSetDef
|
VO <ScenarioPath> ImageSetDef {Action} {ImageSetOptions} |
Update time options. |
10 |
| VO PruneArtic
|
VO <ObjectPath> PruneArtic {PruneOption} |
Update time options. |
10 |
| VO ReloadArticFile
|
VO <ObjectPath> ReloadArticFile |
Add Place object. |
10 |
| VO SaveArticStateAsDef
|
VO <ObjectPath> SaveArticStateAsDef {On | Off} |
New command. |
10 |
| VO ScaleModel
|
VO <ObjectPath> ScaleModel <ScaleFactor> |
Add Place object. |
10 |
| VO SetDefaultCameraPos
|
VO <ScenarioPath> SetDefaultCameraPos <ObjectClass> <Azimuth> <Elevation> |
New command. |
10 |
| VO SetModelColorToObjColor
|
VO <ObjectPath> SetModelColorToObjColor {On | Off} |
New command. |
10 |
| VO SolarPanel
|
VO <ObjectPath> SolarPanel {CommandOption} |
Update time options. |
10 |
| VO UseSmoothTransition
|
VO <ScenarioPath> UseSmoothTransition {On | Off} |
New command. |
10 |
| VO UseStoredViewImageSets
|
VO <ScenarioPath> UseStoredViewImageSets {On | Off} |
New command. |
10 |
| VO WindowState
|
VO <ObjectPath> WindowState {Options} |
Newly documented command. |
10 |
| VectorTool Angle
|
VectorTool <ScenarioPath> <ParentObject> {Action} {Angle | AngleTemplate} <AngleName> [{AngleType} <AngleTypeParams>] |
Update vector tool component types. |
10 |
| VectorTool System
|
VectorTool <ScenarioPath> <ParentObject> {Action} {System | SystemTemplate} <SystemName> [{SystemType} <SystemTypeParams>] |
Update vector tool component types. |
10 |
| Window2D
|
Window2D <ScenarioPath> {2DGfxWinOption} <Value> [WindowID <WinNumber>] |
Add InpDevMode EnablePanMode option. |
10 |
| Command |
Format |
Description |
Version |
| ACAT Probability
|
ACAT <AdvCatObjPath> Probability {Parameters} |
New command. |
9.0 |
| ACATEvents_RM
|
ACATEvents_RM <AdvCatObjPath> [{Options}] |
New command. |
9.0 |
| Antenna
|
Antenna <AntObjectPath> {Options} <AttributePath> [<Value>] [<Unit>] |
New command. |
9.0 |
| Antenna_RM
|
Antenna_RM <AntObjectPath> GetValue [<AttributePath>] |
New command. |
9.0 |
| Atmosphere
|
Atmosphere <ObjectPath> SetValue <AttributePath> <Value> [<Unit>] |
New command. |
9.0 |
| Atmosphere_RM
|
Atmosphere_RM <ObjectPath> GetValue [<AttributePath>] |
New command. |
9.0 |
| AttCov Grid
|
AttCov <AttCovObjectPath> Grid {GridOption} <Parameters> |
Command format modified to match updated UI. |
9.0 |
| CheckIsAppBusy
|
CheckIsAppBusy <ApplicationPath> |
New command. |
9.0 |
| ConControl
|
ConControl <ApplicationPath> {ConControlOption} |
Add WildcardIgnoreNackOn, WildcardIgnoreNackOff options. |
9.0 |
| Graphics ExtEphemPoints
|
Graphics <VehObjectPath> ExtEphemPoints {On | Off} |
Command documented. |
9.0 |
| Graphics Label
|
Graphics <ObjectPath> Label {Options} |
Add option for user to specify the label text. |
9.0 |
| GroundEllipse_R
|
GroundEllipse_R <VehObjectPath> {GetAllSets [IncludeEmptySets] | GetSetEllipses <SetName>} |
Added IncludeEmptySets option. |
9.0 |
| HPOP Options
|
HPOP <ObjectPath> Options {ForceModelOption} <ModelParameters> |
Add GeoMagFluxSource option. |
9.0 |
| HideBrowser
|
HideBrowser <ApplicationPath> |
This command is not new but has not been documented prior to STK 9. |
9.0 |
| Location
|
Location <SensorObjectPath> {LocationType} <Parameters> |
New Point option. |
9.0 |
| OpenHtmlViewer
|
OpenHtmlViewer <ApplicationPath> ["<HtmlPage>"] |
New command. |
9.0 |
| Point 3DModel
|
Point <SensorObjectPath> 3DModel <AttachPoint> |
New command. |
9.0 |
| RFEnvironment
|
RFEnvironment <ScenarioPath | ObjectPath> SetValue <AttributePath> <Value> [<Unit>] |
New command. |
9.0 |
| Receiver
|
Receiver <RcObjectPath> {Options} <AttributePath> [<Value>] [<Unit>] |
New command. |
9.0 |
| Receiver_RM
|
Receiver_RM <RcObjectPath> GetValue [<AttributePath>] |
New command. |
9.0 |
| Reference
|
Reference <SatObjectPath> SetRefSatellite <SatObjectPath> |
Command documented. |
9.0 |
| SavePreferences
|
SavePreferences <ApplicationPath> {SaveOption} <Parameters> |
Add SnTgtAccesses option. |
9.0 |
| SetEpoch
|
SetEpoch <ScenarioPath> {"<EpochTime>" | UseAnalysisStartTime} |
Add UseAnalysisStartTime option. |
9.0 |
| SetInterplanetaryMode
|
SetInterplanetaryMode <ApplicationPath> {On | Off} |
Command documented. |
9.0 |
| SetPropSpecific
|
SetPropSpecific <SatObjectPath> {PropOption} <Parameter>
|
Add PropagationFrame option. |
9.0 |
| SetPropagatorDefaults
|
SetPropagatorDefaults <ApplicationPath> {Propagator} {PropOptions}
|
New command. |
9.0 |
| ShowBrowser
|
ShowBrowser <ApplicationPath> |
This command is not new but has not been documented prior to STK 9. |
9.0 |
| TLESwitchMethod
|
TLESwitchMethod <SatObjectPath> {Epoch | Midpoint | TCA | Override "<OverrideTime>" | Disable} [<ElSetNumber>]
|
Override Switch method can not be applied to the first el set; Disable can not be applied to All el sets. |
9.0 |
| VO LightSource
|
VO <ScenarioPath> LightSource {Add | Delete | Modify | DeleteAll} [{LightOption} <Parameter>]...
|
Add attenuation options. |
9.0 |
| VO Pass3D
|
VO <ObjectPath> Pass3D {LeadTrailOption} <Parameters> |
New command that replaces VO Pass command. |
9.0 |
| VO TickMarks
|
VO <ObjectPath> TickMarks ({TickOption} <Parameters>)... |
New command. |
9.0 |
| VO_R Overlays
|
VO_R <ScenarioPath> Overlays [<WinNumber>] |
New command. |
9.0 |
| VO_R StoredViewNames
|
VO_R <ScenarioPath> StoredViewNames [<WinNumber> | All] |
Add the All option. |
9.0 |
| Window2D_R
|
Window2D_R <ScenarioPath> {DataType} {DataTypeOptions} [WindowId <WinNumber>] |
Add Property options. |
9.0 |
| Window3D_R
|
Window3D_R <ScenarioPath> {WindowOption} [WindowID <WinNumber>] |
New command. |
9.0 |
| Command |
Format |
Description |
Version |
| Application
|
Application <ApplicationPath> {AppCmdOption} [<Value>] |
New command. |
6.2 |
| Convert MapGridPoint
|
Convert <ScenarioPath> MapGridPoint {FromMapGridSpec} {PointDef} {ToMapGridSpec} |
New command. |
6.2 |
| ExportConfig
|
ExportConfig <ApplicationPath> {ExportOption} [<Parameters>] |
New command. |
6.2 |
| ExportConfig_R
|
ExportConfig_R <ApplicationPath> [{Connection | App}] |
New command. |
6.2 |
| ExtendBoundary
|
ExtendBoundary <ATObjectPath> Pattern [{PointType}] <NumPoints> {PointDefn}... |
Points can now be entered in UTM format. |
6.2 |
| ExtendLine
|
ExtendLine <LTObjectPath> [{PointType}] <NumPoints> {PointDefn}... |
Points can now be entered in UTM format. |
6.2 |
| Graphics LineStyle
|
Graphics <ObjectPath> LineStyle {LineStyle} |
Added command for Planets. |
6.2 |
| Graphics LineWidth
|
Graphics <ObjectPath> LineWidth <LineWidth> |
Added command for Planets. |
6.2 |
| MapTracking
|
MapTracking <ScenarioPath> {TrackingType} [<WinNumber>] |
New command. |
6.2 |
| MessageWindow
|
MessageWindow <ApplicationPath> {MsgWinOption} [<Parameters>] |
Reinstate command |
6.2 |
| ReportOptions
|
ReportOptions <ObjectPath> {ReportOption} <Parameters> |
New command. |
6.2 |
| SetAccessOption
|
SetAccessOption <ObjectPath> {Whole | Any} |
New command. |
6.2 |
| SetBoundary
|
SetBoundary <ATObjectPath> {Type} <Parameters> |
Points can now be entered in UTM format. |
6.2 |
| SetDescription
|
SetDescription <ObjectPath> {Type} [{Option}] "<Description>" |
Add Extend and File options. |
6.2 |
| SetLine
|
SetLine <LTObjectPath> [{PointType}] <NumPoints> {PointDefn}... |
Points can now be entered in UTM format. |
6.2 |
| SetLineAnchor
|
SetLineAnchor <LTObjectPath> {AnchorOption} |
Points can now be entered in UTM format. |
6.2 |
| VO Annotation DataDisplayArea
|
VO <ScenarioPath> Annotation DataDisplayArea {AnnotationOption} |
Renamed VO DataDisplayArea command. |
6.2 |
| VO Annotation Frame
|
VO <ScenarioPath> Annotation Frame {AnnotationOption} <Parameters> |
New command. |
6.2 |
| VO Annotation Selection
|
VO <ScenarioPath> Annotation Selection {AnnotationOption} <Parameters> |
New command. |
6.2 |
| VO Annotation ViewerPos
|
VO * Annotation ViewerPos {AnnotationOption} <Parameters> |
Renamed VO ViewerPosAnnotation command. |
6.2 |
| VO DeleteStoredView
|
VO <ScenarioPath> DeleteStoredView "<ViewName>" [<WinNumber>]
|
New command. |
6.2 |
| VO ElevContours
|
VO <ObjectPath> ElevContours {Options} |
New command. |
6.2 |
| VO GlobeDetails
|
VO <ScenarioPath> GlobeDetails {DetailOption} <DetailParams> [WindowID <WinNumber>]
|
Overhaul command to use keyword-value pairs. |
6.2 |
| VO InitializeSolarPanelsToSun
|
VO <ObjectPath> InitializeSolarPanelsToSun Enable {Yes | No}
|
New command. |
6.2 |
| VO SaveStoredView
|
VO <ScenarioPath> SaveStoredView "<ViewName>" [<WinNumber>]
|
Command renamed from VO SaveCurrentView. |
6.2 |
| VO ViewPath
|
VO <ScenarioPath> ViewPath "<ViewPathName>" {ViewPathOption} [{State}] <WinNumber> |
Allow view path names containing spaces, when enclosed in quotes. |
6.2 |
| Waypoints
|
Waypoints <VehObjectPath> {WaypointOption}
|
New command. |
6.2 |