Specify the pull up G force.
Related Commands
Syntax
MissionModeler <AircraftObjPath> Aircraft SetValue PullUpG <Value> [<Unit>]
MissionModeler <AircraftObjPath> Aircraft PerfModel "Acceleration" "<AccelMdlName>" SetValue PullUpG <Value> [<Unit>]
Description
Specify the force normal to the velocity vector used to transition into a climb or to transition out of a dive into the next flight segment. Low values increase the likelihood of terrain impact when a procedure is defined with a high rate of descent close to the ground.
Use the MissionModeler Aircraft SetValue command to set PullUpG for the Acceleration built-in performance model.
Use the MissionModeler Aircraft PerfModel Acceleration SetValue command to set PullUpG for the Acceleration custom performance model.
| <Value> | Enter the pull up G force value as a number greater than or equal to 1.05. |
| [<Unit>] | Enter the unit that the <Value> is entered in. This parameter is optional, the default unit is G-SeaLevel. The dimension type is MissionModelerG. |
Example: Specifying PullUpG for built-in Acceleration Performance Model
MissionModeler */Aircraft/Aircraft1 Aircraft SetValue PullUpG 2.004 G-SeaLevel
MissionModeler */Aircraft/Aircraft1 Aircraft SetValue PullUpG 1.12
Example: Specifying PullUpG for custom Acceleration Performance Model
MissionModeler */Aircraft/Aircraft1 Aircraft PerfModel "Acceleration" "AccelMdl1" SetValue PullUpG 1.75