Return the method used to leave the arc.
Related Commands
Syntax
MissionModeler_RM <AircraftObjPath> Procedure <Index> GetValue ExitArcMethod
Description
| <Index> | Enter the index of the procedure. |
Return Value
| 0 | Outbound - The aircraft leaves the arc on a heading away from the site, on the stop bearing. |
| 1 | OnArc - The aircraft arrives at the stop bearing on a heading in the direction of the arc. |
| 2 | Inbound - The aircraft leaves the arc on a heading towards the site, on the stop bearing. |
Examples
MissionModeler_RM */Aircraft/Aircraft1 Procedure 1 GetValue ExitArcMethod