Return the latitude, longitude and altiude of the intermediate enroute points for the procedure.
Related Commands
- MissionModeler_RM Procedure (ArcEnroute) GetValue
- MissionModeler_RM Procedure (Basic Point to Point) GetValue
- MissionModeler_RM Procedure (Enroute) GetValue
- MissionModeler_RM Procedure (Holding - Racetrack) GetValue
- MissionModeler_RM Procedure (Holding - Circular) GetValue
- MissionModeler_RM Procedure (Holding - Figure-8) GetValue
- MissionModeler_RM Procedure (Landing) GetValue
Syntax
MissionModeler_RM <AircraftObjPath> Procedure <Index> GetValue IntermediateEnroutePoints [<LatLonUnit> <AltUnit>]
Description
| <Index> | Enter the index of the procedure. |
| [<LatLonUnit>] | Specify the unit that the Latitude and Longitude values are returned in. Valid values are those unit types that are common between the Latitude and Longitude dimensions. This includes deg, rad, DMS, and HMS. |
| [<AltUnit>] | Specify the unit that the Altitude value is returned in. The dimension type is MissionModelerAltitude. |
Both unit values must be entered, or neither must be entered.
Return Value
| Procedure Type | Points Returned |
|---|---|
| ArcEnroute | 3 Points: end of initial turn, start of turn into arc, start of arc. |
| Basic Point to Point | 2 Points: end of initial turn, start of end turn. |
| Enroute | 2 Points: end of initial turn, start of end turn. |
| Holding - Racetrack | 3 Points: end of initial turn, start of turn into pattern, start of pattern. |
| Holding - Circular | 3 Points: end of initial turn, start of turn into pattern, start of pattern. |
| Holding - Figure-8 | 3 Points: end of initial turn, start of turn into pattern, start of pattern. |
Examples
MissionModeler_RM */Aircraft/Aircraft1 Procedure 1 GetValue IntermediateEnroutePoints
MissionModeler_RM */Aircraft/Aircraft1 Procedure 2 GetValue IntermediateEnroutePoints deg km