Specify the standard roll rate for the aircraft.
Related Commands
Syntax
MissionModeler <AircraftObjPath> Aircraft SetValue RollRate <Value> [<Unit>]
MissionModeler <AircraftObjPath> Aircraft PerfModel "Acceleration" "<AccelMdlName>" SetValue RollRate <Value> [<Unit>]
Description
Define the standard roll rate - the rate at which the aircraft bank angle changes - of the aircraft in a turn.
Use the MissionModeler Aircraft SetValue command to set RollRate for the Acceleration built-in performance model.
Use the MissionModeler Aircraft PerfModel Acceleration SetValue command to set RollRate for the Acceleration custom performance model.
| <Value> | Enter the ground roll rate value as a number greater than or equal to 1.0 deg/sec. |
| [<Unit>] | Enter the unit that the <Value> is entered in. This parameter is optional, the default unit is radians/second (rad/sec). The dimension type is MissionModelerAttAngleRate. |
Example: Specifying RollRate for built-in Acceleration Performance Model
MissionModeler */Aircraft/Aircraft1 Aircraft SetValue RollRate 20 deg/sec
MissionModeler */Aircraft/Aircraft1 Aircraft SetValue RollRate 0.34
Example: Specifying RollRate for custom Acceleration Performance Model
MissionModeler */Aircraft/Aircraft1 Aircraft PerfModel "Acceleration" "AccelMdl1" SetValue RollRate 1.75