TakeoffLandingClAlpha

Specify the takeoff/landing Cl-Alpha for the aircraft.

Related Commands

MissionModeler Aircraft PerfModel Acceleration SetValue

Syntax

MissionModeler <AircraftObjPath> Aircraft PerfModel "Acceleration" "<ModelName>" SetValue TakeoffLandingClAlpha <Value>

Description

Define the slope of the coefficient of lift curve, for takeoff and landing. This value is valid for Custom Acceleration models only.

Note: This value can only be set if the Basic Fixed Wing Aerodynamics Aerodynamic Strategy is selected. (In STK 9 this strategy can not be set via Connect.)

"<ModelName>"	Enter the acceleration model name.
<Value>	Enter the value, a real number.

Examples

MissionModeler */Aircraft/Aircraft1 Aircraft PerfModel "Acceleration" "AccelMdl1" SetValue TakeoffLandingClAlpha 0.25