Insert a new profile item.
Related Commands
Syntax
MissionModeler <AircraftObjPath> Aircraft PerfModel "Climb" "<ModelName>" SetValue InsertProfileItem <Altitude> <AltitudeUnit> <DownRange> <DownRangeUnit> <ElapsedTime> <ElapsedTimeUnit> <Fuel> <FuelUnit>
Description
Insert a new profile item with the specified values.
| "<ModelName>" | Enter the Climb model name. |
| <Altitude> | Enter the altitude for the aircraft. This value should be greater than or equal to 0.0. |
| <AltitudeUnit> | Enter the unit that the <Altitude> is entered in. The dimension type is MissionModelerAltitude. |
| <DownRange> | Enter the ground distance from the first point in the climb model to the aircraft's position at this point. |
| <DownRangeUnit> | Enter the unit that the <DownRange> is entered in. The dimension type is MissionModelerDistance. |
| <ElapsedTime> | Enter the amount of time that has elapsed since the first point of the climb model. |
| <ElapsedTimeUnit> | Enter the unit that the <ElapsedTime> is entered in. The dimension type is MissionModelerDuration. |
| <Fuel> | Enter the amount of fuel required to climb from sea level to the entered altitude. |
| <FuelUnit> | Enter the unit that the <Fuel> is entered in. The dimension type is MissionModelerFuelQuantity. |
Examples
MissionModeler */Aircraft/Aircraft1 Aircraft PerfModel "Climb" "ClimbMdl1" SetValue InsertProfileItem 50000 ft 34.6 nm 00:05:00.00 HMS 415 lb