InsertProfileItem
Insert a new profile item.
Related Commands
Syntax
MissionModeler <AircraftObjPath> Aircraft PerfModel "Descent" "<ModelName>" SetValue InsertProfileItem <Altitude> <AltitudeUnit> <DownRange> <DownRangeUnit> <ElapsedTime> <ElapsedTimeUnit> <Fuel> <FuelUnit>
Description
Insert a new profile item with the specified values.
"<ModelName>" | Enter the Descent model name. |
<Altitude> | Enter the altitude for the aircraft. This value should be greater than or equal to 0.0. |
<AltitudeUnit> | Enter the unit that the <Altitude> is entered in. The dimension type is MissionModelerAltitude. |
<DownRange> | Enter the ground distance from the first point in the Descent model to the aircraft's position at this point. |
<DownRangeUnit> | Enter the unit that the <DownRange> is entered in. The dimension type is MissionModelerDistance. |
<ElapsedTime> | Enter the amount of time that has elapsed since the first point of the Descent model. |
<ElapsedTimeUnit> | Enter the unit that the <ElapsedTime> is entered in. The dimension type is MissionModelerDuration. |
<Fuel> | Enter the amount of fuel required to descend to sea level from the entered altitude. |
<FuelUnit> | Enter the unit that the <Fuel> is entered in. The dimension type is MissionModelerFuelQuantity. |
Examples
MissionModeler */Aircraft/Aircraft1 Aircraft PerfModel "Descent" "DescentMdl1" SetValue InsertProfileItem 12000 ft 34.6 nm 00:25:00.00 HMS 415 lb