TurnAngle

Specify the angle that will define the arc's length, measured from the start bearing.

Related Commands

  • MissionModeler Procedure (ArcEnroute) SetValue
  • Syntax

    MissionModeler <AircraftObjPath> Procedure <Index> SetValue TurnAngle <Value> [<Unit>]

    Description

    <Index> Enter the index of the ArcEnroute procedure being modified.
    <Value> Enter a real value.
    [<Unit>] Enter the unit that the <Value> is entered in. This parameter is optional, the default unit is radians (rad). The dimension type is Angle.

     

    Examples

    MissionModeler */Aircraft/Aircraft1 Procedure 2 SetValue TurnAngle 45 deg