Specify the initial capacity of a fuel tank station.
Related Commands
Syntax
MissionModeler <AircraftObjPath> Configuration Station "<StationName>" SetValue InitialFuelState <Value> [<Unit>]
MissionModeler <AircraftObjPath> Aircraft DefaultConfiguration Station "<StationName>" SetValue InitialFuelState <Value> [<Unit>]
Description
Specify the amount of fuel contained in the tank at the beginning of the mission; this value cannot exceed the Capacity.
This command is valid for Internal Fuel Tank station and External Fuel Tank station only.
| <StationName> | The name of the station, either an Internal Fuel Tank station or an External Fuel Tank station, for which the initial capacity is being set. |
| <Value> | Enter the initial capacity of the station. |
| <Unit> | Enter the unit that the <Value> is entered in. This parameter is optional, the default unit is kilogram (kg). The unit type is Mass. |
Examples
MissionModeler */Aircraft/Aircraft1 Configuration Station "Internal Fuel Tank 1" SetValue InitialFuelState 1500 lb
MissionModeler */Aircraft/Aircraft1 Aircraft DefaultConfiguration Station "Station 1/External Fuel Tank" SetValue InitialFuelState 907.0