DynamicRpt
Display a dynamic report or strip chart
Syntax
DynamicRpt <ObjectPath> {Text | Strip} "<StyleName>" [{Parameters}...]
Description
Use the DynamicRpt command to display a dynamic report or strip chart.
When specifying Text to display a dynamic report the "<StyleName>" must be a report style name. When specifying Strip to display a strip chart the "<StyleName>" must be a graph style name.
For details on how to specify "<StyleName>" see Report Style Names
The following table describes the parameters for the options.
Parameter | Description |
---|---|
AccessObject <TruncObjectPath> | If the report "<StyleName>" is for an access report then one or more AccessObject <TruncObjectPath> must be included, specifying the object(s) to which access will be computed. |
AdditionalData "<Data>" | Some Report Styles require additional or pre-data, such as a comparison object for the RIC report for a Satellite. For these types of reports you must include this option. More information on styles that require AdditionalData can be found at Report Additional Data. |
The report windows can be removed with the RemoveRptWins Connect command.
This command is not available for STK X.
Examples
To display a dynamic report of the Satellite2's LLA Position:
DynamicRpt */Satellite/Satellite2 Text "LLA Position"
To display a strip chart of the AER access between Fac1 and Satellite2:
DynamicRpt */Facility/Fac1 Strip "AER" AccessObject */Satellite/Satellite2
To display a dynamic report of the RIC report between Satellite2 and Satellite3:
DynamicRpt */Satellite/Satellite2 Text "RIC" AdditionalData "Satellite/Satellite3"
Return message
Group membership
This command belongs to the following group(s):
Version
11.3