Graphics RadarCrossSection
Set and modify the display of Radar Cross Section (RCS) for a specified frequency.
Syntax
Graphics <ObjectPath> RadarCrossSection {Option} <Parameters>
Description
Related commands
The Graphics RadarCrossSection command allows you to set and modify the display of contour levels for a specified frequency.
{Option} <Parameters> can be:
{Option} | <Parameters> | Description |
---|---|---|
Show | {On | Off} | Show or hide the radar cross section (RCS) contour graphics. |
Frequency | <value> | Specify the frequency of interest. |
Polarization | {Primary | Orthogonal} | Select Primary for RCS real pattern type channels and Orthogonal for RCS complex pattern type channels. |
ShowAtAlt | {On [<altitude>] | Off} | Display the RCS contour at the specified altitude. If On is entered, optionally enter the altitude value in Connect distance units. |
RelToMax | {On | Off} | If On is entered, the RCS contour level values are assumed to be relative to the maximum value.> |
Levels | <Parameters> | See the Graphics Levels (Comm & Radar) command for a description of <Parameters>. |
Pattern | <Parameters> | See the Graphics Pattern (Comm & Radar) command for a description of <Parameters>. |
Examples
Turn on the display of radar cross section contour graphics:
Graphics */Aircraft/Aircraft1 RadarCrossSection Show On
To set the radar cross section contour graphics appear at 5 intervals between -10.0 and -100.0:
Graphics */Aircraft/Aircraft1 RadarCrossSection Levels StartStop -10.0 -100.0 -20.0
Return message
Group membership
This command belongs to the following group(s):
Version
11.5