SetAzElMask (Sensor)
Set the azimuth-elevation mask for a sensor
Syntax
SetAzElMask <SensorObjectPath> {UseOption} [<Parameters>]
Description
Use the SetAzElMask command to control the application of azimuth-elevation mask data for a sensor.
{UseOption} and <Parameters> can be:
{UseOption} | <Parameters> | Description |
---|---|---|
MaskFile | <MaskFilePath> {XAxis | YAxis | ZAxis} | Set the az-el mask file and the primary boresight axis.
"<MaskFilePath>" can be the path to a file on your local drive or the path to a file on an SDF server. See Specifying Paths for "<SDFFilePath>" syntax information. The boresight axis is only required when using an AEM file; it is not required when using a body mask file (file extension .bmsk). |
None | N/A | Use this option to turn off mask data currently being used. |
Examples
To set the azimuth-elevation mask for the Horizon sensor using an external mask file along the Y axis:
SetAzElMask */Satellite/ERS1/Sensor/Horizon MaskFile "C:\stk\User\stkDataCoverage\AlongHorizonBoresight.aem" YAxis
To turn off the use of an az-el mask file for the Horizon sensor:
SetAzElMask */Satellite/ERS1/Sensor/Horizon None
Return message
Group membership
This command belongs to the following group(s):
Version
11.5