Description | Example | Return message | Group

SetGUIUnits

Set units of measure for entering data via the graphical user interface (panels) (Deprecated Command)

Syntax

SetGUIUnits <ScenarioPath> {Dimension} {UnitID} [{Dimension2} {UnitID2}...]

This command is OBSOLETE and has been replaced by: Units_Set

Description

This command was deprecated in STK 10.1, and made obsolete in STK 12, it should no longer be used. This command has been replaced by the Units_Set command.

The SetGUIUnits command allows you to set the default units used at the scenario level. This command alters how all units are entered into STK via the user interface.

Connect recognizes a number of {UnitID} abbreviations. Use the abbreviated or alternative forms described in the table below to set units. To change the units used to relay commands use the SetUnits command or to change the units used to report information use the SetReportUnits command.

Dimension and Unit Values are NOT case-sensitive.

{Dimension}{UnitID}
ANGLEDegree | DEG
Radian | RAD
ARCSecond | ARCSEC
ARCMinute | ARCMIN
DEGMINSEC | DMS
HRMINSEC | HMS
DEG:MIN:SEC
HR:MIN:SEC
SecondsOfARC
BANDWIDTHHertz | HZ
KiloHertz | kHZ
MegaHertz | MHZ
GigaHertz | GHZ
BITSBits | B
KiloBits | KB
MegaBits | MB
GigaBits | GB
TeraBits | TB
DATEGregorianLocal | GregorianLCL| GregLCL
GregorianUTC | GregUTC
GregorianTAI | GregTAI
GregorianTDT | GregTDT
GregorianTDB | GregTDB
GregorianGPSTime | GregGPSTime | GregGPS
GPSTime | GPS
JulianLocal | JulianLCL | JULLCL
JulianUTC | JULUTC
Julian4UTC | Julian4 | JUL4
JulianDate | JULDate
JULDateOffset | JDateOffset | JDateOff

An optional "<Offset>" can also be entered, where "<Offset>" is a real number.

ModifiedJulianDate | ModJULDate
JulianEphemerisDate | JULEphemDate
JulianTAI | JULTAI
GMTSystem | GMT | ZULU
EpochSecond | EpochSEC
EpochMinute | EpochMIN
EpochHour | EpochHR
EpochDAY
EpochYear | EpochYr
DD/MM/YYYY
YYDDD
YYDDD.DDD
YYYYDDD
YYYYDDD.HHMMSS
YYYYMMDD
YYYYMMDD.DDD
YYYY/MM/DD
YYYY/MM/DDTIME
YYYY:MM:DD
YYYY:MM:DD:HH:MM:SS.sss
ISO-YD
ISO-YMD
MJDsUTC
MJDsTAI
MissionElapsed | MISElap

An optional "<Offset>" can also be included, where "<Offset>" is a date entered in GregUTC format.

DISTANCEFeet | FT
KiloFeet
Meter | M
NauticalMile | NM
KiloMeter | KM
StatuteMile | SM | MI
Astronomical | AU
EarthRadii | RE
Furlong | FUR
Fathom | FM
League | Leag
DOPPLERVELOCITYMetersPerSecond | MS | m/s
FeetPerSecond | FPS
KiloMetersPerHour | KPH
NauticalMilesPerHour | KTS
StatuteMilesPerHour | MPH
DURATIONSecond | SEC
HRMINSEC | HR:MIN:SEC | HMS
FORCENewton
KiloNewton | KN
Pound | LB
FREQUENCYHertz | HZ
KiloHertz | kHZ
MegaHertz | MHZ
GigaHertz | GHZ
TeraHertz | THZ
LATITUDEDegree | DEG
Radian | RAD
DEGMINSEC | DMS
HRMINSEC | HMS
DEG:MIN:SEC
HR:MIN:SEC
DEGMINSEC_DIR
DMS_DIR
DEG:MIN:SEC_Dir
LONGITUDEDegree | DEG
Radian | RAD
Degree0-360
HRMINSEC | HMS
DEG:MIN:SEC
HR:MIN:SEC
DEGMINSEC_DIR
DMS_DIR
DEG:MIN:SEC_Dir
MAGNETICFIELDTesla | T
NanoTesla | NT
Gauss
MilliGauss | MGauss
MASSKilograms | KG
Pounds | LB
Slug
PERCENTPercentage
UnitValue
POWERMilliWatts | MW
Watts | W
KiloWatts | KW
MegaWatts | MGW
GigaWatts | GW
DBM
DBW
POWERFLUXDENSITYWatts | WM2
Decibel | DB(WM2)
POWERSPECTRALDENSITYWattsPerHertz | WHZ
Decibel | DB
PRESSUREPascal | PA
KiloPascal | KPA
PoundsPerSquareInch | PSI
PRFHertz | HZ
KiloHertz | kHZ
MegaHertz | MHZ
RATIOUNITS
Decibel | DB
RCSSquareMeters | SQM
Decibel | DB
DBSM
SARTIMERESPRODMetersPerSecond | Meter-Second | MSEC
MetersPerMilliSecond | Meter-MilliSecond | MMSEC
SMALLDISTANCEInches | IN
CentiMeter | CM
MilliMeter | MM
Micron | UM
NanoMeter | NAM
Meter | M
Feet | FT
SMALLTIMESecond | SEC
MilliSecond | MSEC
MicroSecond | USEC
NanoSecond | NSEC
PicoSecond | PSEC
SMALLVELOCITYInchesPerSecond | INS | in/s
CentiMetersPerSecond | CMS | cm/s
MilliMetersPerSecond | MMS | mm/s
MetersPerSecond | MS | m/s
FeetPerSecond | FPS
SOLIDANGLESteradians | Sterad
MilliSteradians | MSterad
MicroSteradians | USterad
NanoSteradians | NSterad
Spheres
Hemisphere
QuarterSpheres | QuartSphere
SphericalRightAngle | SphRightAng
SphericalDegrees | SphDeg
SquareDegrees | SqrDeg
SquareGrades | SqrGrade
SPECIFICIMPULSE (Astrogator only)Second | SEC
SPECTRALDENSITYUHZ
DBHZ
Unit
Decibel
TEMPERATURECelsius | DEGC
Fahrenheit | DEGF
Kelvin | K
TIMESecond | Sec
Minute | Min
Hour
Day
Centiday
Fortnight | FN

The dimension DATARATE is obsolete in STK 9. Use Bits / SmallTime instead.

The dimension UNITTEMPERATURE is obsolete in STK 9. Use TEMPERATURE instead.

MissionModeler Units

{Dimension}{UnitID}
MissionModelerAltitudeFeet | FT
KiloFeet | KFT
Meter | M
NauticalMile | NM
KiloMeter | KM
StatuteMile | Mile | SM | MI
MissionModelerAngleOfAttackDegree | DEG
Radian | RAD
DEGMINSEC | DMS
HRMINSEC | HMS
DEG:MIN:SEC
HR:MIN:SEC
MissionModelerAttitudeAngleDegree | DEG
Radian | RAD
DEGMINSEC | DMS
HRMINSEC | HMS
DEG:MIN:SEC
HR:MIN:SEC
MissionModelerBearingAngleDegree | DEG
Radian | RAD
DEGMINSEC | DMS
HRMINSEC | HMS
DEG:MIN:SEC
HR:MIN:SEC
MissionModelerDistanceFeet | FT
KiloFeet | KFT
Meter | M
NauticalMile | NM
KiloMeter | KM
StatuteMile | Mile | SM | MI
MissionModelerForceKGF | KilogramForce
Newton
KN | Kilonewton
LB | LBF | Pound
MissionModelerFuelQuantityKilogram | KG
Pound | LB
MissionModelerGStandard | StandardSeaLevelG
GSL | GSeaLevel
MissionModelerPowerW | Watt | FlightWatt
KW | KWatt | FlightKilowatt
HP | Horsepower
MissionModelerPSFCLbmHrHp | LBM/HR/HP | PSFCLbmHrHp
LbmSecHp | LBM/SEC/HP | PSFCLbmSecHp
KgHrW | KG/HR/W | PSFCKgHrW
KgSecW | KG/SEC/W | PSFCKgSecW
MissionModelerRunwayLengthFeet | FT
KiloFeet | KFT
Meter | M
NauticalMile | NM
KiloMeter | KM
StatuteMile | Mile | SM | MI
MissionModelerTimeSecond | SEC
Minute | MIN
Hour | HR
MissionModelerTSFCLbmHrLbf | LBM/HR/LBF | TSFCLbmHrLbf
LbmSecLbf | LBM/SEC/LBF | TSFCLbmSecLbf
KgHrN | KG/HR/N | TSFCKgHrN
KgSecN | KG/SEC/N | TSFCKgSecN

Examples

To set the time units to display in hours, the distance units to display in kiloMeters, the bandwidth to display in gigahertz, and the ratio to display in decibels:

SetGUIUnits * TIME Hour Distance KM BandWidth GHZ RATIO Decibel

To set the date unit to display in Julian Date Offset with an <Offset> value of 1200 and set the angle units to display in degrees:

SetGUIUnits * Date JDateOff "1200.0" Angle Degrees

Return message

Group membership

This command belongs to the following group(s):

Obsolete Commands

Version

12