SetLineAnchor
Set the anchor point for a LineTarget
Syntax
SetLineAnchor <LTObjectPath> {AnchorOption}
Related commands
Description
Set the anchor point for a LineTarget based on the index number, or the latitude and longitude of the point.
{AnchorOption} | Description |
---|---|
Index <Index> | Set the point indicated by the index number, to be the anchor point. Valid values for <Index> are 1 to number of points in the LineTarget |
LatLon <Latitude> <Longitude> | Set the point specified by the latitude and longitude as the anchor point. <Latitude> and <Longitude> are entered in Connect Latitude and Longitude units (default is degrees). |
UTM <ZoneStr> <Easting> <Northing> | Set the point specified by the UTM parameters.
Valid values for <ZoneStr> are A, B, Y, Z or ddc, where 00>dd>61 and c is C-X. <Easting> and <Northing> are entered in Connect distance units. |
Examples
To set the anchor point to the 3rd line point:
SetLineAnchor */LineTarget/TestLT Index 3
To set the anchor point to the point at 10 deg latitude, 26.5 degs longitude:
SetLineAnchor */LineTarget/TestLT LatLon 10 26.5
Return message
Group membership
This command belongs to the following group(s):
Version
6.2