SetResolution
Set resolution properties for a sensor
Syntax
SetResolution <SensorObjectPath> {ResolutionOption} <Value>
Description
The Resolution command allows you to define the resolution of the sensor in terms of focus and image quality.
{ResolutionOption} | Description |
---|---|
Pitch <Value> | <Value> is entered in microns. |
FocalLength <Value> | <Value> is entered in meters. |
Examples
To set the detector pitch of the Uplink sensor on the Perth facility to 85.4 microns:
SetResolution */Facility/Perth/Sensor/Uplink Pitch 85.4
Return message
Group membership
This command belongs to the following group(s):
Version
4.0.2