Description | Example | Return message | Group

Surveillance

Set surveillance properties for an object

Syntax

Surveillance <ObjectPath> {SurveillanceOptions} <Parameters>

Description

The Surveillance command allows you to set the surveillance parameters for all types of vehicles, facility, place, target and radar. {SurveillanceOptions} and <Parameters> can be:

{SurveillanceOptions}<Parameters>
Enable{On | Off}
Criteria"<Value>"
AssignObject{All | <TruncObjectPath>}
RemoveObject <TruncObjectPath>

If {SurveillanceOption} is Criteria, "<Value>" can be any of the following:

  • "SearchTrack SNR1"
  • "SearchTrack Integrated SNR"
  • "SearchTrack Integration Time"
  • "SearchTrack Dwell Time"
  • "SearchTrack Pulses Integrated"
  • "Closing Velocity"

The following Criteria "<Value>" are valid for facility, place and target only:

  • "SAR Az Resolution"
  • "SAR Integration Time"
  • "SAR Area Rate"
  • "SAR SNR"
  • "SAR PTCR"
  • "SAR Time - Resolution"
  • "SAR SCR"

If {SurveillanceOptions} is Criteria, "<Value>" must be entered exactly as it appears here, including spaces.

Examples

To set the surveillance criteria for the CoSprings facility so that the closing velocity of the target in the doppler velocity unit for the report is used:

Surveillance */Facility/CoSprings Criteria "Closing Velocity"

Return message

Group membership

This command belongs to the following group(s):

Radar

Version

10