VO VertexOffset
To offset the projection of a sensor as displayed in the 3D window
Syntax
VO <SensorObjectPath> VertexOffset {VertexOption} [<Parameters>]
Description
The sensor VertexOffset command allows the projection for a sensor to be offset from the sensor parent object's actual position in the parent's body coordinate frame.
{VertexOption} and <Parameters> can be:
| {VertexOption} <Parameters> | Description |
|---|---|
| Inherit {On | Off} | Indicate whether the position is inherited from the parent object. |
| Translational <XOffset> <YOffset> <ZOffset> {AxisOffset} <OffsetValue> | {AxisOffset} can be Radius or Boresight. <XOffset> <YOffset> <ZOffset> are entered in Connect distance units, and should be between -500000.0 and 500000.0 meters. <OffsetValue> is entered in small distance units, and should be between 0.0 and 500000.0 meters. |
| AttachPoint <AttachPointName> | Enter the AttachPointName as it appears in the model file. |
Examples
VO */Satellite/ERS1/Sensor/Downlink VertexOffset Translational -100 110 175 Radius 12.0
Return message
Group membership
This command belongs to the following group(s):
Version
4.1.1