ObjectCoverage
Available Data Providers
| Name | Description |
|---|---|
| All DOPs | Reports DOP values for all points along the object's route. Only provides information when the FigureOfMerit is defined as DOP and coverage has been computed for the object using the Coverage tool. |
| All NAVs | Reports all navigation accuracy values for points along the object's route. Only provides information when the FigureOfMerit is defined as DOP and coverage has been computed for the object using the Coverage tool. |
| DOP Best N | Computes the DOP based on the specified number of assets. The reported DOP value uses the algorithm chosen by the figure of merit's Type (Best N, Best Four, or Over Determined). |
| FOM Definition | The configuration setting of the figure of merit. |
| FOM Satisfaction | Periods of satisfaction for the object as defined by the satisfaction criteria associated with the FOM. |
| FOM Static Value | Static value of the figure of merit. |
| FOM by Time | Reports the value of the figure of merit over time. |
| NAV Best N | Report navigation accuracy and asset selection for the point currently selected via the figure of merit grid inspector.
Asset selection is based on achieving minimum GACC. Only provides information when the FigureOfMerit is defined as Navigation Accuracy.
A point must be selected from the figure of merit grid inspector to use this data provider. |
| Object Coverage | Access information of the single-object coverage for each asset. |
| Object Daily Coverage | Reports the percent time covered for the single-object coverage, reported on a per day basis. |
| Object Probability of Coverage | The probability of coverage being achieved as a
function of the time past a request for coverage. In other words, if you request coverage now, what is the probability that you will have access within the next hour, the next six hours or the next day? The probability that coverage is achieved at the instant of the request is the same as the percentage of time covered. Thus, if the object is covered 20% of the time, then the object will be covered at the time of request 20% of the time, which means that 20% of the time the wait for coverage will be zero. The object has a 100% probability of coverage at a time from request that equals the maximum coverage gap. If the maximum coverage gap for the object is 30 minutes, then the worst case request for coverage would occur at the beginning of the 30 minute coverage gap. In that case, after 30 minutes have elapsed since the time of the request, you are guaranteed to have coverage. The object is considered to be covered at some time t if it has access to one or more of the assigned assets at that time. |
| Percent Val | Reports percent over and percent under values for a set of up to 2001 sampled times during the coverage analysis interval. All times within the coverage analysis interval are considered. |