Styles by Object | Reports | Graphs
Installed Styles: ObjectCoverage
The following is the list of installed Report and Graph styles for use with the Report Manager. Users may create their own styles to report/graph their desired content using the available data providers.
Reports
| Name | Description |
|---|---|
| All DOPs | Reports DOP values for all points along the object's route. Only provides information when the FigureOfMerit is defined as DOP and coverage has been computed for the object using the Coverage tool. |
| Best N | Reports the figure of merit properties and the DOP value based on the specified number of assets. The reported DOP value uses the algorithm chosen by the figure of merit's Type (Best N, Best Four, or Over Determined). |
| Coverage | Access information of the single-object coverage for each asset. |
| Daily Coverage | Reports the percent time covered for the single-object coverage, reported on a per day basis. |
| FOM Static Value | Reports the figure of merit properties and the static value of the figure of merit. |
| FOM Value | Reports the figure of merit properties and the value of the figure of merit over time. |
| Probability Of Coverage | The probability of coverage being achieved as a
function of the time past a request for coverage. In other words, if you request coverage now, what is the probability that you will have access within the next hour, the next six hours or the next day? The probability that coverage is achieved at the instant of the request is the same as the percentage of time covered. Thus, if the object is covered 20% of the time, then the object will be covered at the time of request 20% of the time, which means that 20% of the time the wait for coverage will be zero. The object has a 100% probability of coverage at a time from request that equals the maximum coverage gap. If the maximum coverage gap for the object is 30 minutes, then the worst case request for coverage would occur at the beginning of the 30 minute coverage gap. In that case, after 30 minutes have elapsed since the time of the request, you are guaranteed to have coverage. The object is considered to be covered at some time t if it has access to one or more of the assigned assets at that time. |
| Satisfaction Intervals | Reports the figure of merit properties and the satisfaction intervals for the single-object coverage as defined by the satisfaction criteria associated with the figure of merit. |
Graphs
| Name | Type | Description |
|---|---|---|
| All DOPs | Time XY | A plot of DOP values over time for all points along the object's route. Only provides information when the FigureOfMerit is defined as DOP and coverage has been computed for the object using the Coverage tool. |
| Coverage | Interval | An Interval graph of the access intervals for the single-object coverage to its assets. The intervals represent the union of times that the object has access to any of the assets. |
| FOM Value | Time XY | A plot of the value of the figure of merit over time. |
| Probability Of Coverage | XY | A plot of the probability of coverage being achieved, as a function of the time
past a request for coverage. In other words, if you request coverage now, what is the probability that you will have access within the next hour, the next six hours or the next day? The probability that coverage is achieved at the instant of the request is the same as the percentage of time covered. Thus, if the object is covered 20% of the time, then the object will be covered at the time of request 20% of the time, which means that 20% of the time the wait for coverage will be zero. The object has a 100% probability of coverage at a time from request that equals the maximum coverage gap. If the maximum coverage gap for the object is 30 minutes, then the worst case request for coverage would occur at the beginning of the 30 minute coverage gap. In that case, after 30 minutes have elapsed since the time of the request, you are guaranteed to have coverage. The object is considered to be covered at some time t if it has access to one or more of the assigned assets at that time. |
| Satisfaction Intervals | Interval | An Interval graph of the satisfaction intervals for the single-object coverage as defined by the satisfaction criteria associated with the figure of merit. |