Styles by Object | Radar Report Styles | Radar Graph Styles

Report Style: SAR Properties

Reports settings in the Radar Basic->SAR property page. In order for SAR to be enabled, the radar must be on a satellite, missile or aircraft.

Data Provider:SAR Properties

Type: Fixed data.

Availability: Reports

Column Listing

Column	Column Name	Element	Type	Dimension	Description
1	Enabled	Enabled	Text	Unitless	Reports out if the SAR (synthetic aperture radar) mode has been turned on.
2	Integration Time	Integration Time	Real Number	Time	Reports out the constraint values applied to integration time - the fixed integration time or time to achieve the desired azimuth resolution, depending on the setting of the analysis mode when defining the radar.
3	Azimuth Resolution	Azimuth Resolution	Real Number	Distance	Reports out the constraint values applied to azimuth resolution - the fixed azimuth resolution or the resolution achievable within the desired integration time, depending on the setting of the analysis mode when defining the radar.
4	MNR	MNR	Real Number	Ratio	Reports out the multiplicative noise ratio - the contribution of ambiguous range and side-lobe returns to the image formation process. The default value is -20 dB.
5	PRF	PRF	Real Number	PRF	Reports out the pulse repetition frequency - range: 0.1 to 1000 kHz.
6	Unambig Range	Unambig Range	Real Number	Distance	Reports out the desired target range for which unambiguous data is required. The Range is ambiguous where the true target range is greater than the ambiguous range as computed by radar. The Unambiguous Range constraint denies access when the range is ambiguous (i.e. it enforces a low PRF mode).
7	Az Broad Factor	Az Broad Factor	Real Number	Unitless	Reports out this analysis weighting factor to compensate for signal processing losses in the azimuth dimension when SAR mode is enabled. The default value is 1.2 and can be changed by the user.
8	Rng Broad Factor	Rng Broad Factor	Real Number	Unitless	Reports out this analysis weighting factor to compensate for signal processing losses in the range dimension when SAR mode has been enabled. The default value is 1.2 but can be changed by the user.
9	IF Bandwidth	IF Bandwidth	Real Number	Bandwidth	Reports out the IF Bandwidth which is the analog-to-digital sampling rate of the SAR. This bandwidth assumes a quadrature sampling without oversampling; in the case of real-valued sampling the IF Bandwidth must be twice the sampling rate. This rate determines the amount of data that can be collected in a given amount of time.
10	Rng Resolution	Rng Resolution	Real Number	Distance	Reports out the range resolution, which is inversely related to the pulse-compressed RF bandwidth of the transmitted signal. This is a user-defined parameter that you have to set.
11	Bandwidth	Bandwidth	Real Number	Bandwidth	The Receiver Bandwidth.
12	Pulse Compression Ratio	Pulse Compression Ratio	Real Number	Unitless	Reports out the ratio of compressed to uncompressed RF bandwidth if SAR mode has been enabled and this factor has been selected.
13	Pulse Width	Pulse Width	Real Number	SmallTime	Reports out the width of the transmitted pulse (the inverse of uncompressed RF bandwidth) if SAR mode has been enabled and this factor has been selected.
14	Scene Depth	Scene Depth	Real Number	Distance	Reports out the range swath along the radar line of sight to the target if SAR mode has been enabled and this factor has been selected.
15	Rng Chirp Rate	Rng Chirp Rate	Real Number	SARRngChirp	Reports out the frequency modulation rate of the pulse compression (1/sec2) if SAR mode has been enabled and this factor has been selected.