Styles by Object | Reports | Graphs
Installed Styles: Receiver
The following is the list of installed Report and Graph styles for use with the Report Manager. Users may create their own styles to report/graph their desired content using the available data providers.
Reports
| Name | Description |
|---|---|
| Active Constraints | Lists the constraints that are applied when computing the access. |
| Antenna Gain | This report provides the detailed information for an antenna gain pattern. Each line of the report conforms to a direction angle from the center of the antenna (phase center) through the gain pattern, with a user-specified angle step. The report has three columns: elevation angle, azimuth angle, and the antenna gain value along that direction. |
| Antenna GainMatrix | This report provides the detailed information for an antenna gain pattern. The gain pattern is presented in a matrix form. Each line of the report conforms to an elevation direction angle from the center of the antenna (phase center) through the gain pattern. The angle steps for azimuth and elevation angles are user specified. The line contains several columns reporting data along a range of azimuth angles. The first column is the elevation angle, and the rest of the columns show the gain pattern values under a column for each azimuth angle. |
| Antenna Properties | This report provides the detailed information for an antenna’s attributes. |
| Basic Properties | Reports all the parameters associated with set up of the receiver. |
| LLA Contour Lines | Latitude, Longitude and Altitude of points that make up the antenna gain contours. These contours are specified by the user. Each section of the report starts with a gain level followed by the latitudes, longitudes and altitudes that make up the associated contour. |
| LLR Contour Lines | Latitude, Longitude and Radius of points that make up the contours. These contours are specified by the user. Each section of the report starts with a gain level followed by the latitudes, longitudes and radii that make up the associated contour. |
| Receiver Filter | The spectrum and filter data provider supplies the means for generating frequency vs filter magnitude data for the receiver's filter. |
Graphs
| Name | Type | Description |
|---|---|---|
| AntGain Azi Cut Vs Elevation | XY | This is set of graphs where each individual graph provides the antenna gain for a given azimuth angle across a specified range of elevation angles. |
| AntGain Elev Cut Vs Azimuth | XY | This is set of graphs where each individual graph provides the antenna gain for a given elevation angle across a specified range of azimuth angles. |
| Receiver Filter | XY | Shows the receiver RF filter magnitude data as a function of receiver bandwidth frequency. |