Control the display of different graphics attributes during access
Graphics <ObjectPath> AccessIntervals {Action} [<Parameters>]
The Graphics AccessIntervals command allows you to specify different graphics attributes for times during access and times when access isn't available. This can be very helpful in quickly determining access periods during animation.
Note: Before changes made using this command will take effect, you must set the Attribute Type to AccessIntervals, using the Graphics SetAttrType (Vehicles) command.
{Action} can be:
| {Action} <Parameters> | Description |
|---|---|
| Clear | Removes all display intervals based on access times from the display times list. |
| ObjectPath <ToAccessObjectPath> | Sets a display interval based on access to the <ToAccessObjectPath> specified so that object graphics display only during access between these two objects. |
| Edit {All | DuringAccess | DuringNoAccess} [{AttributesOption} {Action}] | Specify the attributes for All
graphics, or for graphics DuringAccess or DuringNoAccess. You must
specify at least one {AttributeOption} {Action} pair.
Refer to the Graphics Basic (Vehicles) command for a list of valid {AttributeOption} {Action} pairs. |
To turn On access intervals for the ERS1 satellite in the current scenario:
Graphics */Satellite/ERS1 SetAttrType AccessIntervals
To set the Baikonur facility as the object of access:
Graphics */Satellite/ERS1 AccessIntervals ObjectPath Facility/Baikonur
To set the Perth facility as another object of access:
Graphics */Satellite/ERS1 AccessIntervals ObjectPath Facility/Perth
To set access intervals so that the ERS1 satellite displays in green (Color Index #8) when in an access period to the 2 facilities in the preceding example:
Graphics */Satellite/ERS1 AccessIntervals Edit DuringAccess show On Color 8
To set access intervals so that the ERS1 satellite displays in red (Color Index #5) when in a period of no accesses to the 2 facilities in the preceding example:
Graphics */Satellite/ERS1 AccessIntervals Edit DuringNoAccess show On Color 5
If activated, Connect returns an acknowledgement message.
This command belongs to the following group(s):
4.1.1
STK Programming Interface 11.0.1