Control the display of boresight graphics in the 2D Graphics window
Graphics <ObjectPath> Boresight {On | Off} [{Color} {MarkerType}]
The Graphics Boresight command for the Communications module allows you to control the display of boresight graphics in a 2D Graphics window.
If On is entered, you must specify the display {Color} and {MarkerType} for the boresight.
For valid {Color} options see Common Options.
Valid values for {MarkerType} are Point, Plus, Star, Circle, X, Square, or Custom "<FileName>". If {MarkerType} is Custom, you must specify the "<FilePath>" of the custom marker file.
Warning: Receiver and transmitter graphics can be displayed only if the transmitter or receiver is defined as a Complex or multibeam model. Because the Simple and Medium antenna models are isotropic, there is no data to contour. As a result, if you try to apply the command to a transmitter or receiver that is defined as anything other than Complex, the command will fail.
To set the graphics properties of the GndRcvr receiver so that boresight graphics display in yellow with a Square marker style:
Graphics */Facility/Customer/Receiver/GndRcvr Boresight On yellow Square
If activated, Connect returns an acknowledgement message.
This command belongs to the following group(s):
4.1.1
STK Programming Interface 11.0.1