Calculate and display a vehicle's swath
Swath <ObjectPath> {Type} <Value> [{DisplayOption}]
The Swath command for vehicles can be used to display vehicle swath.
{Type} can be Elevation, HalfAngle, HalfWidth, ElevationEnvelope and HalfAngleEnvelope.
The <Value> for Elevation, HalfAngle, ElevationEnvelope and HalfAngleEnvelope is entered in degrees. Valid values are between 0.0 and 90.0 degrees.
The <Value> for HalfWidth is entered in Connect distance units. Valid value is greater or equal to 0.0 meters.
{DisplayOption} can be Edge, Filled or None. If you don't specify a {DisplayOption}, the swath is turned Off.
To display a 10 degree filled swath for the satellite Shuttle:
Swath */Satellite/Shuttle Elevation 10.0 Filled
To display a 22 degree half angle swath for the satellite Shuttle, displaying only edges:
Swath */Satellite/Shuttle HalfAngle 22.0 Edge
If activated, Connect returns an acknowledgement message.
This command belongs to the following group(s):
8.1
STK Programming Interface 11.0.1