Set the TLE switch method for SGP4 vehicles
TLESwitchMethod <SatObjectPath> {Epoch | Midpoint | TCA | Override "<OverrideTime>" | Disable} [<ElSetNumber>]
Use the TLESwitchMethod command to define when to switch between TLE sets, for SGP4 satellites. The SGP4 satellite must have more than one element set.
Use <ElSetNumber> to select the TLE element set. This value can be an integer value or All. If no <ElSetNumber> is entered then the switch method is set for All element sets.
If Override is entered then the "<OverrideTime>" must be entered, and <ElSetNumber> must be entered and can not be 1 or All.
"<OverrideTime>" is entered in Connect Date units and is only valid if Override is entered.
Disable can not be applied to All, an <ElSetNumber> must be entered. If all el sets have been disabled then the satellite will not be propagated.
To set the switch method to Epoch for element set number 2:
TLESwitchMethod */Satellite/Satellite1 Epoch 2
To disable the use of switch methods for element set 3 of Satellite1:
TLESwitchMethod */Satellite/Satellite1 Disable 3
To set the switch method to override using the time 1 Nov 1998 01:23:45.00 for element set 2:
TLESwitchMethod */Satellite/Satellite1 Override "1 Nov 1998 01:23:45.00" 2
If activated, Connect returns an acknowledgement message.
This command belongs to the following group(s):
9.0
STK Programming Interface 11.0.1