Set resolution properties for a sensor
SetResolution <SensorObjectPath> {ResolutionOption} <Value>
The Resolution command allows you to define the resolution of the sensor in terms of focus and image quality.
| {ResolutionOption} | Description |
|---|---|
| Pitch <Value> | <Value> is entered in microns. |
| FocalLength <Value> | <Value> is entered in meters. |
To set the detector pitch of the Uplink sensor on the Perth facility to 85.4 microns:
SetResolution */Facility/Perth/Sensor/Uplink Pitch 85.4
If activated, Connect returns an acknowledgement message.
This command belongs to the following group(s):
4.0.2
STK Programming Interface 11.0.1