| Name | Description |
|---|---|
| Active Constraints | Lists the "from" STK object name and type to which the active constraint belongs. |
| All Constraints | Descriptions of all constraints available for this object and its parent object. |
| Angles | Used to report angle and its time rate of change rate. Angle must be defined in the Vector Geometry Tool. |
| Antenna Gain | Antenna Gain provides Antenna Gain vs. Elevation Angle (or Theta). Inputs required before the report is created include the range of elevation angles (or Theta) and the fixed value of azimuth angle (or phi) that the user is interested in seeing. |
| Antenna Gain Matrix | Provides information on the antenna gain pattern in a matrix format. The matrix format shows the antenna gain pattern in two dimensions. |
| Antenna Properties | Antenna Properties describe the Antenna type, specific parameters associated with the antenna and the orientation in quaternions. |
| Available Times | The time intervals over which the object is available to participate in access computations. |
| Axes Choose Axes | Used to report orientation and angular velocity of the selected set of axes relative to a specified reference set of axes. Both sets of axes must be defined in the Vector Geometry Tool. |
| Basic Properties | Basic properties describe specific input parameters associated with the transmitter model. |
| Body Axes Orientation | Selects set of object's body axes to report its orientation and angular velocity relative to reference set of axes. The reference set of axes must be defined in the Vector Geometry Tool. Note that selecting object's body axes is equivalent to selecting object's attitude. |
| Body Axes Orientation YPR 123 | Selects set of object's body axes to report its orientation and angular velocity relative to reference set of axes. The reference set of axes must be defined in the Vector Geometry Tool. Note that selecting object's body axes is equivalent to selecting object's attitude. Uses 123 (or RPY) sequence for YPR angles representation. |
| Body Axes Orientation YPR 132 | Selects set of object's body axes to report its orientation and angular velocity relative to reference set of axes. The reference set of axes must be defined in the Vector Geometry Tool. Note that selecting object's body axes is equivalent to selecting object's attitude. Uses 132 (or RYP) sequence for YPR angles representation. |
| Body Axes Orientation YPR 213 | Selects set of object's body axes to report its orientation and angular velocity relative to reference set of axes. The reference set of axes must be defined in the Vector Geometry Tool. Note that selecting object's body axes is equivalent to selecting object's attitude. Uses 213 (or PRY) sequence for YPR angles representation. |
| Body Axes Orientation YPR 231 | Selects set of object's body axes to report its orientation and angular velocity relative to reference set of axes. The reference set of axes must be defined in the Vector Geometry Tool. Note that selecting object's body axes is equivalent to selecting object's attitude. Uses 231 (or PYR) sequence for YPR angles representation. |
| Body Axes Orientation YPR 312 | Selects set of object's body axes to report its orientation and angular velocity relative to reference set of axes. The reference set of axes must be defined in the Vector Geometry Tool. Note that selecting object's body axes is equivalent to selecting object's attitude. Uses 312 (or YRP) sequence for YPR angles representation. |
| Body Axes Orientation YPR 321 | Selects set of object's body axes to report its orientation and angular velocity relative to reference set of axes. The reference set of axes must be defined in the Vector Geometry Tool. Note that selecting object's body axes is equivalent to selecting object's attitude. Uses 321 (or YPR) sequence for YPR angles representation. |
| Collection of Interval Lists | A time component that produces a collection of related interval lists. |
| Condition | Condition placing bounds on a specific scalar. |
| Condition Set | Defines a set of conditions for when the elapsed time falls within specified time limits |
| Crdn Available Times | Time intervals for which a Vector Geometry Tool component for the object is available. |
| Data Provider Detail | Data Provider Detail - hierarchically list the available data providers and all of the included elements |
| Data Provider Summary | Data Provider Summary - a list of all available data providers |
| Eb/No vs BER | Deprecated; included for backward compatibility only. The Eb/No vs BER data provider has moved from the Transmitter to the Receiver. |
| Interval | A time component that produces a single interval of time. |
| Interval List | A time component that produces an ordered list of time intervals. |
| LLA Contour Lines | Latitude, Longitude and Altitude of points that make up the antenna gain contours. These contours are specified by the user. Each section of the report starts with a gain level followed by the latitudes, longitudes and altitudes that make up the associated contour. |
| LLR Contour Lines | Latitude, Longitude and Radius of points that make up the contours. These contours are specified by the user. Each section of the report starts with a gain level followed by the latitudes, longitudes and radii that make up the associated contour. |
| Parameter Set Attitude | The Attitude parameter set defines orientation of one set of Axes from VGT relative to another. This parameter set includes the following sub-sets: Quaternion, Euler, DCM and AngleAxis. Quaternion includes four quaternion elements Q1, Q2, Q3, Q4. Euler includes all 12 sequences where within each there are three angles: A, B, C. DCM includes all nine elements of the direction cosine matrix; e.g., XX, XY, etc. AngleAxis includes X, Y, Z components of the unit axis of rotation and RotationAngle. |
| Parameter Set Cartographic Trajectory | Cartographic Trajectory Parameter Set contains calculations that relate a specified point to the selected central body shape. This parameter set contains the following sub-sets: Cartesian, Centric and Detic. Cartesian includes X, Y, Z and Radius. Centric includes LLR with Latitude, Longitude and Radius, and SubPoint with Cartesian elements. Detic includes several LLA with Latitude, Longitude, Altitude, SurfaceNormal with Cartesian elements without Radius, and SubPoint with Cartesian elements. It also includes Terrain and MSL both with LLA and SubPoint subsets of their own. |
| Parameter Set Trajectory | The Trajectory parameter set defines the position of a specified Point from VGT with respect to the reference System. This parameter set includes the following sub-sets: Cartesian, Cylindrical and Spherical. Cartesian includes X, Y, Z and Radius. Cylindrical includes Azimuth, Height, Radius. Spherical includes Azimuth, Elevation, CoElevation, and Radius. |
| Planes Choose System | Used to report the selected plane and its velocity in a specified reference coordinate system. Both plane and coordinate system must be defined in the Vector Geometry Tool. |
| Points Choose Plane | Used to report projection of the selected point and its velocity on a specified reference plane. Both point and plane must be defined in the Vector Geometry Tool. |
| Points Choose System | Used to report the selected point and its velocity in a specified reference coordinate system. Both point and coordinate system must be defined in the Vector Geometry Tool. |
| Points(Fixed) | Used to report the selected point and its velocity in the object's central body fixed coordinate system. The point must be defined in the Vector Geometry Tool. |
| Points(ICRF) | Used to report the selected point and its velocity in the object's central body ICRF coordinate system. The point must be defined in the Vector Geometry Tool. |
| Points(Inertial) | Used to report the selected point and its velocity in the object's central body inertial coordinate system. The point must be defined in the Vector Geometry Tool. |
| Points(J2000) | Used to report the selected point and its velocity in the object's central body J2000 coordinate system. The point must be defined in the Vector Geometry Tool. |
| Refraction Settings | The refraction settings of the object. |
| Scalar Calculations | Calculation component that produces scalar time-varying calculations. |
| Time Array | A time component that produces intervals of time within which there are ordered arrays of times. |
| Time Instant | A time component that produces a single moment in time. |
| Transmitter Spectrum and Filter | The spectrum and filter data provider supplies the means for generating frequency vs spectrum magnitude, filter magnitude, and filtered spectrum magnitude data for the source transmitter's selected modulation and filter types. |
| User Supplied Data | Values of custom data associated with the object. |
| Vector Choose Axes | Used to report the selected vector and its derivative in a specified reference set of axes. Both vector and axes must be defined in the Vector Geometry Tool. |
| Vector Choose Plane | Used to report projection of the selected vector and its derivative on a specified reference plane. Both vector and plane must be defined in the Vector Geometry Tool. |
| Vectors(Body) | Used to report the selected vector and its derivative in the object's body axes. The vector must be defined in the Vector Geometry Tool. |
| Vectors(Fixed) | Used to report the selected vector and its derivative in the object's central body fixed axes. The vector must be defined in the Vector Geometry Tool. |
| Vectors(ICRF) | Used to report the selected vector and its derivative in ICRF axes. The vector must be defined in the Vector Geometry Tool. |
| Vectors(Inertial) | Used to report the selected vector and its derivative in the object's central body inertial axes. The vector must be defined in the Vector Geometry Tool. |
| Vectors(J2000) | Used to report the selected vector and its derivative in J2000 axes. The vector must be defined in the Vector Geometry Tool. |
STK Programming Interface 11.0.1