TE_SensorQuickLooks
Generate, graph or delete a sensor quick look pairing.
Syntax
TE_SensorQuickLooks <ScenarioPath> {Action} From <SensorName> To <TargetName> {Options}
Related Commands
Description
The T&E Toolkit Plugin must be installed in order to use this command.
The TE_SensorQuickLooks command allows a user to generate, graph or delete a sensor quick look pairing, i.e. create the scalars, between the from and to objects.
The valid values for {Action} are:
CreateGraph
DeleteGraphs
Angle
Vector
Delete
The following table describes the To and From objects.
From "<SensorName>" | The name of an STK sensor. |
To "<TargetName>" | The name of an STK object. |
The following table describes the {Options}.
Name "<Name>" | The name of the quick look. |
Frame {Spherical | Rectangular} | |
Interval {On | Off} | The full name of an interval component. |
Show {On | Off} | Used with Angle or Vector. |
Overlay {On | Off} | Used with Graph. |
Axes <Axes> | The name of an STK VGT Axes component, used with Vector or Create. |
Example
TE_SensorQuickLooks * Graph from "Sensor1" to "TargetTSPI" Name "AzEl" Frame "spherical" Overlay "OFF"
TE_SensorQuickLooks * Graph from "Sensor1" to "TargetTSPI" Name "Slant" Frame "spherical" Interval "Scenario/TE_Automation RADAR_Run1 EventInterval"
TE_SensorQuickLooks * Vector from "Sensor1" to "TargetTSPI" Name "Direction" Axes "Sensor1_NativeAxes_01" Show "ON"
ReturnMessage
Group Membership
This command belongs to the following group(s):
Version
11.5