| Name |
Description |
| All DOPs
|
Reports DOP values for all points along the object's route. This data provider can only provide information when the FigureOfMerit is defined as DOP and covergae has been computed for the object using the Coverage tool. |
| All NAVs
|
Reports all navigation accuracy values for points along the object's route.This data provider can only provide information when the FigureOfMerit is defined as DOP and covergae has been computed for the object using the Coverage tool. |
| DOP Best N
|
Computes the DOP based on the specified number of assets. If you select this method, you also need to specify a value for Best N. |
| FOM Definition
|
The configuration setting of the figure of merit. |
| FOM Satisfaction
|
Periods of satisfaction for the object as defined by the satisfaction criteria associated with the FOM. |
| FOM Static Value
|
Static value of the figure of merit. |
| FOM by Time
|
Statistical information on time dependent values. Statistics are generated by sampling values from all grid points at the reported times. Grid points for which a value cannot be computed are not included in the reported statistics. |
| NAV Best N
|
Report navigation accuracy and asset selection for the point currently selected via the figure of merit grid inspector. Asset selection is based on achieving minimum GACC. This data provider can only provide information when the FigureOfMerit is defined as Navigation Accuracy. A point must be selected from the figure of merit grid inspector to use this data provider. |
| Object Coverage
|
Access information for the point currently selected by the grid inspector. |
| Object Daily Coverage
|
Daily access summary information for the point currently selected by the grid inspector. Information is reported on a per day basis. |
| Object Probability of Coverage
|
The probability of coverage for the point selected in the grid inspector being achieved as a function of the time past a request for coverage. In other words, if you request coverage of the point now, what is the probability that you will have visibility to the point within the next hour, the next six hours or the next day. The probability that coverage is achieved at the instant of the request is the same as the percentage of time that the point is covered. Thus, if the point is covered 20% of the time, then the point will be covered at the time of request 20% of the time, which means that 20% of the time the wait for coverage will be zero. The point has a 100% probability of coverage at a time from request that equals the maximum coverage gap for the point. If the maximum coverage gap for a point is 30 minutes, then the worst case request for coverage would occur at the beginning of the 30 minute coverage gap. In that case, after 30 minutes have elapsed since the time of the request, you are guaranteed to have coverage of the point. A point is considered to be covered if it has access to one or more of the assigned assets. |
| Percent Val
|
Reports percent over and percent under values for the point currently selected via the figure of merit grid inspector. A point must be selected from the figure of merit grid inspector to use this data provider. |