RFI
Set radio frequency interference options for facilities, ships, aircraft and ground vehicles
Syntax
RFI <ObjectPath> {RFIOption} <Parameters>
Description
The RFI command allows you to set radio frequency interference options for analysis purposes. {RFIOption} and <Parameters> can be:
| {RFIOption} <Parameters> | Description |
|---|---|
| TargetObject <TruncObjectPath> | Specify the Target Object. The TargetObject must be a Satellite or Missile. |
| CenterFrequency <Value> | The CenterFrequency is entered in frequency units set at the scenario level. The value must be greater or equal to 0. |
| Bandwidth <Value> | The Bandwidth is entered in frequency units set at the scenario level. The value must be greater or equal to 0. |
| ExclusionHalfAngle <Value> | The Exclusion Half Angle is entered in degrees, and is between -90.0 and 90.0. |
| Transmit <EIRPValue> | The Transmit EIRP value is entered in dBW. |
| Receive <PowerValue> | The Receive Power value is entered in dBW. |
| StartStop {TimeInterval} | Enter times that are within the target object's time period.
For valid {TimeInterval} values see Time Options. |
| Database "<FilePath>" | Specify the Secondary TLE Database. |
| RFIDatabase "<FilePath>" | Specify the Radio Frequency Interference Database which contains data on comm assets (receivers and transmitters) attached to satellites with given SSC numbers. |
| AddVictims {On | Off} [<NumberToAdd>] | Specify whether to add potential victims to the Scenario, and optionally, how many to add. |
| Compute | Compute the radio frequency interference (use the Report and Graph commands to view results). |
"<FilePath>" for Database or RFIDatabase can be the path to a file on your local drive or the path to a file on an SDF server. See Specifying Paths for "<SDFFilePath>" syntax information.
Example
To set the center frequency of the Santiago ground station to 123.0 GHz:
RFI */Facility/Santiago CenterFrequency 12.3
To set radio frequency interference options for the Santiago ground station:
RFI */Facility/Santiago ExclusionHalfAngle 33.0 TargetObject Satellite/Satellite2 Transmit 123.4
ReturnMessage
Group Membership
This command belongs to the following group(s):
Version
11.6