VO SurfaceLines
Set lines in a 3D window to be drawn on terrain.
Syntax
VO <ScenarioPath> SurfaceLines {LineOptions}
Description
Use the VO SurfaceLines command to put surface lines on terrain. This is a scenario level setting that affects the following lines:
- Area Targets
- Line Targets
- Range Contour rings - On facility and place, when Use terrain data is checked and on terrain following ground vehicles
- Map Details
- Lat/Lon Lines
- Equator and Prime Meridian lines
- VPF Data
- Vehicles - Routes on terrain following ground vehicles; Ground tracks on non-ground vehicles and Swaths on non-ground vehicles
Valid values for {LineOptions} are described in this table.
| {LineOptions} | Description |
|---|---|
| OnTerrain {On | Off | WhenTerrainServerIsOn} | If set to On and terrain is under the line, then the line will conform to the terrain.
If set to WhenTerrainServerIsOn then the line will be shown when the visualization for a 3D window is using the terrain server. For best performance only turn On when terrain is present. |
Example
To set lines to be drawn on terrain:
VO * SurfaceLines OnTerrain On
ReturnMessage
Group Membership
This command belongs to the following group(s):
Version
11.0