Graphics GlobalAttributes
Specify whether or not a given attribute should be displayed in the 2D Graphics window
Syntax
Graphics <ScenarioPath> {AttributeOption} {On | Off | <Value>}
The Graphics GlobalAttributes command allows you to specify whether or not a given attribute will be displayed in the 2D Graphics window for all options except for AccAnimaLineLineWidth. The AccAnimaLineLineWidth option enables you to specify the width of the line between two access objects. By default, individual objects will inherit the settings set by this command.
Description
| {AttributeOption} | Description |
|---|---|
| ShowLabels | Specify whether objects display in the 2D Graphics window with text labels. |
| ShowGndTracks | Specify whether ground tracks display. This option affects Satellites, Launch Vehicles and Missiles. |
| ShowRoutes | Specify whether routes display. This option affects Ships, Aircraft, and Ground Vehicles. |
| ShowPassLabels | Specify whether pass numbers are shown at the pass break locations in the 2D Graphics window. This option affects Satellites only. |
| ShowElsetNum | Specify whether element set numbers for the satellites display. This option is valid for Satellites only, and affects only SGP4 satellites with multiple two-line element sets. |
| ShowSensors | Specify whether sensor projections display in the 2D Graphics window. |
| ShowWaypoints | Specify whether waypoints for Ships, Aircraft, and Ground Vehicles are displayed. |
| ShowTurnMarkers | Specify whether turn markers for Ships, Aircraft, and Ground Vehicles are displayed. A turn radius must be specified for the waypoint in order for turn markers to appear. |
| ShowOrbits | Specify whether satellite orbit tracks and launch vehicle and missile trajectories display. This setting applies to Satellites, Launch Vehicles and Missiles only. |
| ShowOrbitMarkers | Specify whether the orbit marker for satellites, launch vehicles, and missile trajectories display. This option affects only the perspective and orthographic map projections. |
| ShowGndMarkers | Specify whether the marker for a vehicle displays. This option affects only the perspective and orthographic map projections. |
| ShowAreaTgtCentroids | Specify whether the area target's centroid displays in the 2D Graphics window. |
| AllowAnimUpdate | Specify whether an animation cycle for the current time is run after you click Apply or OK on any STK property page so that time-dependant graphics are immediately updated. Otherwise, you must click the Reset button on the Animation toolbar to update time-dependant graphics displays such as sensor fields of view. |
| AccShowLine | Specify whether a line appears on the 2D and 3D Graphics windows between the two access objects to show when they are accessible to one another during animation. |
| AccAnimaLineLineWidth <Value> | Specify the width of the line between new access objects. <Value> must be greater than 1. |
| AccAnimHigh | Specify whether a box appears around each object during access. |
| AccStatHigh | Specify whether access is highlighted in the 2D Graphics window as a thick line overlying the ground tracks for a vehicle or a vehicle sensor and as an X for a facility, a place, a target or a sensor that is attached to a facility, place or target. |
| ShowPlanetOrbits | Specify whether planet orbit tracks display. This option affects only the perspective and orthographic map projections. |
| ShowPlanetCbiPos | Specify whether the position of the planet displays in the 2D Graphics window in the Central-Body Inertial (CBI) coordinate frame. This option affects only the perspective and orthographic map projections. |
| ShowPlanetCbiLabel | Specify whether planet labels display in the 2D Graphics window. |
| ShowPlanetGroundPos | Specify whether the point on the Earth directly below the planet displays in the 2D Graphics window. |
| ShowPlanetGroundLabel | Specify whether a label appears at the location of each subplanet point in the 2D Graphics window |
Examples
Use this command to set various global attributes:
Graphics * GlobalAttributes ShowPassLabels On
Graphics * GlobalAttributes ShowElsetNum Off
Graphics * GlobalAttributes ShowSensors On
Graphics * GlobalAttributes ShowWaypoints Off
Return message
Group membership
This command belongs to the following group(s):
Version
12.1