Description

Interval list containing intervals during which specified condition is satisfied. Determination is performed within interval list using Sampling and Convergence parameters.

Public Properties

Condition	The condition component.
Convergence	The Convergence definition, which uses time tolerance to determine when times for intervals of satisfaction are found.
CustomTimeLimits	The interval list or single interval within which intervals of satisfaction are sought. The specified value is used if UseCustomTimeLimits is true. The default is set to overall availability of host object. The time limits will be used if UseCustomTimeLimits is set to true.
Sampling	The Sampling definition, which can use a fixed step, relative tolerance or curvature tolerance. Relative tolerance uses a combination of relative and absolute changes in scalar values between samples. Curvature tolerance also uses changes in slope between samples.
SaveDataOption	Determine if computed intervals of satisfaction are saved/loaded, or recomputed on load if necessary.
UseCustomTimeLimits	Indicate whether to use specified custom time limits (see CustomTimeLimits).

Interfaces

Implemented Interface
IAgCrdnEventIntervalList
IAgCrdn

CoClasses that Implement IAgCrdnEventIntervalListCondition

Name
AgCrdnEventIntervalListCondition

Example

Create and configure list condition event interval.

[C#]

IAgCrdnEventIntervalList intervalList = provider.EventIntervalLists.Factory.CreateEventIntervalListCondition("MyIntervalListSatisfaction",  "MyDescription");
IAgCrdnEventIntervalListCondition asListCondition = intervalList as IAgCrdnEventIntervalListCondition;

asListCondition.Condition = provider.Conditions["AfterStart"];

IAgCrdnIntervalListResult intervals = intervalList.FindIntervals();
if (intervals.IsValid)
{
    foreach (IAgCrdnInterval interval in intervals.Intervals)
    {
        Console.WriteLine("Start: " + interval.Start);
        Console.WriteLine("Stop: " + interval.Stop);
    }
}

Determine the intervals an aircraft is above a certain velocity.

[C#]

IAgCrdnProvider aircraftVgtProvider = stkRoot.GetObjectFromPath("Aircraft/UAV").Vgt;

IAgCrdnEventIntervalList intervalList = aircraftVgtProvider.EventIntervalLists.Factory.CreateEventIntervalListCondition("IntervalsAboveCertainVelocity",  "MyDescription");
IAgCrdnEventIntervalListCondition asListCondition = intervalList as IAgCrdnEventIntervalListCondition;

IAgCrdnCondition aboveBoundCondition = aircraftVgtProvider.Conditions.Factory.CreateConditionScalarBounds("AboveCertainBound", "MyDescription");
IAgCrdnConditionScalarBounds asScalarBounds = aboveBoundCondition as IAgCrdnConditionScalarBounds;
asScalarBounds.Operation = AgECrdnConditionThresholdOption.eCrdnConditionThresholdOptionAboveMin;
asScalarBounds.Scalar = aircraftVgtProvider.CalcScalars["Trajectory(CBI).Cartesian.Z"];
//asScalarBounds.Minimum = 4082;

asListCondition.Condition = aboveBoundCondition;

IAgCrdnIntervalListResult intervals = intervalList.FindIntervals();
if (intervals.IsValid)
{
    foreach (IAgCrdnInterval interval in intervals.Intervals)
    {
        Console.WriteLine("Start: " + interval.Start);
        Console.WriteLine("Stop: " + interval.Stop);
    }
}

Create and configure list condition event interval.

[Visual Basic .NET]

Dim intervalList As IAgCrdnEventIntervalList = provider.EventIntervalLists.Factory.CreateEventIntervalListCondition("MyIntervalListSatisfaction", "MyDescription")
Dim asListCondition As IAgCrdnEventIntervalListCondition = TryCast(intervalList, IAgCrdnEventIntervalListCondition)

asListCondition.Condition = provider.Conditions("AfterStart")

Dim intervals As IAgCrdnIntervalListResult = intervalList.FindIntervals()
If intervals.IsValid Then
	For Each interval As IAgCrdnInterval In intervals.Intervals
		Console.WriteLine("Start: " + interval.Start)
		Console.WriteLine("Stop: " + interval.[Stop])
	Next
End If

Determine the intervals an aircraft is above a certain velocity.

[Visual Basic .NET]

Dim aircraftVgtProvider As IAgCrdnProvider = stkRoot.GetObjectFromPath("Aircraft/UAV").Vgt

Dim intervalList As IAgCrdnEventIntervalList = aircraftVgtProvider.EventIntervalLists.Factory.CreateEventIntervalListCondition("IntervalsAboveCertainVelocity", "MyDescription")
Dim asListCondition As IAgCrdnEventIntervalListCondition = TryCast(intervalList, IAgCrdnEventIntervalListCondition)

Dim aboveBoundCondition As IAgCrdnCondition = aircraftVgtProvider.Conditions.Factory.CreateConditionScalarBounds("AboveCertainBound", "MyDescription")
Dim asScalarBounds As IAgCrdnConditionScalarBounds = TryCast(aboveBoundCondition, IAgCrdnConditionScalarBounds)
asScalarBounds.Operation = AgECrdnConditionThresholdOption.eCrdnConditionThresholdOptionAboveMin
asScalarBounds.Scalar = aircraftVgtProvider.CalcScalars("Trajectory(CBI).Cartesian.Z")
'asScalarBounds.Minimum = 4082;

asListCondition.Condition = aboveBoundCondition

Dim intervals As IAgCrdnIntervalListResult = intervalList.FindIntervals()
If intervals.IsValid Then
	For Each interval As IAgCrdnInterval In intervals.Intervals
		Console.WriteLine("Start: " + interval.Start)
		Console.WriteLine("Stop: " + interval.[Stop])
	Next
End If

STK Vector Geometry Tool	Send comments on this topic.
IAgCrdnEventIntervalListCondition Interface