Description

Determines what interval list is recorded at target clock location by performing signal transmission of original interval list between base and target clock locations. If any signaled interval ends up with start time after its stop, the interval is excluded from signaled list. If neighboring signaled intervals overlap or abut, they are replaced by single interval in signaled list.

Public Properties

BaseClockLocation	The base clock location, which is a point from VGT.
OriginalIntervals	The original time interval list.
SignalDelay	The Signal delay definition, which includes signal transmission, time delay convergence and signal path reference system.
SignalSense	The direction of the signal, whether you are Transmitting or Receiving from the Base Clock Location.
TargetClockLocation	The target clock location, which is a point from VGT.

Interfaces

Implemented Interface
IAgCrdnEventIntervalList
IAgCrdn

CoClasses that Implement IAgCrdnEventIntervalListSignaled

Name
AgCrdnEventIntervalListSignaled

Example

Create and configure signaled event interval list.

[C#]

IAgCrdnProvider satelliteVgtProvider = stkRoot.GetObjectFromPath("Satellite/LEO").Vgt;
IAgCrdnProvider aircraftVgtProvider = stkRoot.GetObjectFromPath("Aircraft/UAV").Vgt;

IAgCrdnEventIntervalList intervalList = satelliteVgtProvider.EventIntervalLists.Factory.CreateEventIntervalListSignaled("MyIntervalListSignaled",  "MyDescription");
IAgCrdnEventIntervalListSignaled asListSingled = intervalList as IAgCrdnEventIntervalListSignaled;

asListSingled.OriginalIntervals = aircraftVgtProvider.EventIntervalLists["BeforeStop.SatisfactionIntervals"];
asListSingled.BaseClockLocation = satelliteVgtProvider.Points["Center"];
asListSingled.TargetClockLocation = aircraftVgtProvider.Points["Center"];

asListSingled.SignalSense = AgECrdnSignalSense.eCrdnSignalSenseTransmit;
IAgCrdnSignalDelayBasic basicSignalDelay = asListSingled.SignalDelay as IAgCrdnSignalDelayBasic;
basicSignalDelay.SpeedOption = AgECrdnSpeedOptions.eCrdnCustomTransmissionSpeed;

// Uses current Time unit preference, this code snippet assumes seconds.
basicSignalDelay.TimeDelayConvergence = 0.002;

IAgCrdnIntervalListResult intervals = intervalList.FindIntervals();
if (intervals.IsValid)
{
    foreach (IAgCrdnInterval interval in intervals.Intervals)
    {
        Console.WriteLine("Start: " + interval.Start);
        Console.WriteLine("Stop: " + interval.Stop);
    }
}

Create and configure signaled event interval list.

[Visual Basic .NET]

Dim satelliteVgtProvider As IAgCrdnProvider = stkRoot.GetObjectFromPath("Satellite/LEO").Vgt
Dim aircraftVgtProvider As IAgCrdnProvider = stkRoot.GetObjectFromPath("Aircraft/UAV").Vgt

Dim intervalList As IAgCrdnEventIntervalList = satelliteVgtProvider.EventIntervalLists.Factory.CreateEventIntervalListSignaled("MyIntervalListSignaled", "MyDescription")
Dim asListSingled As IAgCrdnEventIntervalListSignaled = TryCast(intervalList, IAgCrdnEventIntervalListSignaled)

asListSingled.OriginalIntervals = aircraftVgtProvider.EventIntervalLists("BeforeStop.SatisfactionIntervals")
asListSingled.BaseClockLocation = satelliteVgtProvider.Points("Center")
asListSingled.TargetClockLocation = aircraftVgtProvider.Points("Center")

asListSingled.SignalSense = AgECrdnSignalSense.eCrdnSignalSenseTransmit
Dim basicSignalDelay As IAgCrdnSignalDelayBasic = TryCast(asListSingled.SignalDelay, IAgCrdnSignalDelayBasic)
basicSignalDelay.SpeedOption = AgECrdnSpeedOptions.eCrdnCustomTransmissionSpeed

' Uses current Time unit preference, this code snippet assumes seconds.
basicSignalDelay.TimeDelayConvergence = 0.002

Dim intervals As IAgCrdnIntervalListResult = intervalList.FindIntervals()
If intervals.IsValid Then
	For Each interval As IAgCrdnInterval In intervals.Intervals
		Console.WriteLine("Start: " + interval.Start)
		Console.WriteLine("Stop: " + interval.[Stop])
	Next
End If

STK Vector Geometry Tool	Send comments on this topic.
IAgCrdnEventIntervalListSignaled Interface