Description
Interface used to access the options for a holding circular procedure.
Public Methods
 GetAsProcedure | Get the procedure interface. |
| GetMinimumDiameter | Get the aircraft's minimum diameter at this altitude. |
Public Properties
 AltitudeOptions | Get the altitude options. |
| Bearing | Gets or sets the bearing of the holding point from the site. |
| Diameter | Gets or sets the diameter of the holding pattern. |
| EnrouteCruiseAirspeedOptions | Get the enroute cruise airspeed options. |
| EnrouteOptions | Get the enroute options. |
| EnrouteTurnDirectionOptions | Get the enroute turn direction options. |
| HoldCruiseAirspeedOptions | Get the hold cruise airspeed options. |
| LevelOffMode | Gets or sets the mode for the level off maneuver. |
| ProfileMode | Gets or sets the mode defines how the aircraft will perform the holding pattern. |
| Range | Gets or sets the distance to the holding point from the site. |
| RefuelDumpMode | Gets or sets the mode that defines when the aircraft will leave the holding pattern for a Refuel/Dump operation. |
| TurnDirection | Gets or sets the turn direction to enter the holding pattern. |
| Turns | Gets or sets the number of full turns. |
| UseAlternateEntryPoints | Gets or sets the option to enter the holding pattern from an alternate point. |
| UseMagneticHeading | Gets or sets the option to use a magnetic heading. |
Interfaces
| Implemented Interface |
|---|
| IAgAvtrProcedure |