Description
IAgSnEOIRBand Interface for defining the individual band properties.
Public Properties
 BandName | Gets or sets the name of the band. |
| BitDepth | Gets or sets the number of bits to encode the digital signal with. |
| CalculatingParameters | Flag to set if input parameters are currently being calculated and entered into the object model. |
| DarkCurrent | Gets or sets the dark current noise rate from the detectors in electrons-per-second-per-detector. |
| DetectorFillFactor | Gets or sets the effective fill factor of photosensitive surface area to the total detector surface area. |
| DetectorFullWellCapacity | Gets or sets the full-well capacity of the detectors in electrons-per-detector. |
| DynamicRange | Get the ratio of the brightest signal to the noise floor. |
| DynamicRangeMode | Unlimited allowing pixels to measure any amount of radiant signal without limit or Simulate Saturation where pixels can only measure up to the specified saturation level of radiant signal. |
| EffFocalL | Gets or sets the effective focal length of the current sensor band. |
| EntrancePDia | Diameter of the single lens equivalent optical prescription. |
| Fnumber | Gets or sets the F-Number ratio of the system, the effective focal length divided by the clear aperture diameter for this sensor band. |
| HighBandEdgeWL | Gets or sets the cut-off spectral wavelength of the current sensor band at least one nanometer greater than the cut-on value. |
| HorizontalHalfAngle | Half the horizontal angular extent of the rectangular EOIR sensor bands field-of-view. |
| HorizontalIFOV | Get the horizontal angular extent of a single individual pixels field-of-view for this sensor band. |
| HorizontalPixels | Gets or sets the number of pixels or samples distributed evenly across the horizontal dimension of the rectangular EOIR sensor bands focal plane. |
| HorizontalPP | Gets or sets the spacing between pixels or samples along the horizontal dimension of the rectangular EOIR sensor bands focal plane. |
| ImageQuality | Discrete level of optical image quality. Aberrations are modeled based on a RMS wavefront error. |
| IntegrationTime | Gets or sets the time interval over which radiant signal is collected before generating an image. |
| LongDFocus | Gets or sets the amount of defocus along the optical axis between the ideal image focal plane and the actual detector focal plane for the current sensor band. |
| LowBandEdgeWL | Gets or sets the cut-on spectral wavelength of the current sensor band at least one nanometer less than the cut-off value. |
| NEI | Noise equivalent irradiance or radiance for the current sensor band. |
| NumIntervals | Gets or sets the number of oversampled spectral intervals to discretely simulate for this sensor band. |
| OpticalAutoRebalance | Spatial parameter auto rebalance. |
| OpticalInputMode | Optical parameter input mode. |
| OpticalQualityDataFile | Optical quality describing data file. |
| OpticalQualityDataFileFrequencySampling | Optical quality data file frequency sampling. |
| OpticalQualityDataFileSpatialSampling | Optical quality data file spatial sampling. |
| OpticalTransmission | Band effective optical transmission. |
| OpticalTransmissionMode | Optical transmission input mode. |
| OpticalTransmissionSpectralResponseFile | Optical spectral transmission data file. |
| QEFile | Spectral quantum efficiency data file for the detectors. |
| QEMode | Quantum efficiency input mode. |
| QEValue | Band effective detector quantum efficiency. |
| QSS | Gets or sets the quantization step size of the digital output signal. |
| QuantizationMode | Quantization input mode. |
| RadParamLevel | Radiometric parameter input level. |
| ReadNoise | Gets or sets the read noise from the detectors in electrons. |
| RenderBand | Band render flag. |
| RMSWavefrontError | Gets or sets the RMS wavefront error of the optical system. |
| RSRUnits | System custom RSR units. |
| SaturationMode | Gets or sets the radiant energy units for saturation and sensitivity, Irradiance better suited for observing point sources or Radiance better suited for resolved images. |
| Saturations | Get the collection of Saturation time-value pairs. |
| SEI | Saturation equivalent irradiance or radiance for the current sensor band. |
| Sensitivities | Get the collection of Sensitivity time-value pairs. |
| SimulateQuantization | Simulate quantization effects of the sensor. |
| SpatialAutoRebalance | Spatial parameter auto rebalance. |
| SpatialInputMode | Spatial parameter input mode. |
| SpectralShape | Overall system spectral shape designation. |
| SystemRelativeSpectralResponseFile | System relative spectral response file. |
| VerticalHalfAngle | Half the vertical angular extent of the rectangular EOIR sensor bands field-of-view. |
| VerticalIFOV | Get the vertical angular extent of a single individual pixels field-of-view for this sensor band. |
| VerticalPixels | Gets or sets the number of pixels or samples distributed evenly across the vertical dimension of the rectangular EOIR sensor bands focal plane. |
| VerticalPP | Gets or sets the spacing between pixels or samples along the vertical dimension of the rectangular EOIR sensor bands focal plane. |
| Wavelength | Gets or sets the wavelength in the sensors spectral band to use for diffraction modeling calculations. |
| WavelengthType | Gets or sets the relative position within the sensors spectral band to use as the reference wavelength for diffraction modeling calculations. |