VO WaypointAttributes
Set the 3D Graphics properties for existing waypoints and external ephemeris points.
Syntax
VO <VehObjectPath> WaypointAttributes {WaypointOptions} ({GfxOption} <Parameter>)...
Related commands
Description
Use this command to set the 3D graphics properties for existing waypoints and external ephemeris points.
This command is valid for Aircraft, Ship, and GroundVehicle only.
Use the Graphics Waypoints command to turn on or off the display of waypoints. Then use this command to set the 3D display attributes of the individual waypoints.
{WaypointOptions} can be any number of the following:
| {WaypointOption} | Parameter | Description |
|---|---|---|
| All | Apply settings to all waypoints for the vehicle. | |
| Time | {TimeValue} | Apply settings to the waypoint for the specified time. For valid {TimeValue} values, see Time Options. |
| Index | <WaypointIndexNum> | Specifies the number of the waypoint to which the settings are to be applied. An index number of 0 will affect the last waypoint. |
({GfxOption} <Parameter>) can be any number of the following:
| {GfxOption} | <Parameter> | Description |
|---|---|---|
| MarkerType | Line | Set the marker to be of the line type and specify the Shape (below). |
| Imagefile | Set the marker to be loaded from an external image file (below). | |
| Shape | Point | Select one of these predefined shapes: |
| Plus | ||
| Star | ||
| Circle | ||
| X | ||
| Square | ||
| Triangle | ||
| Size | <SizeValue> | Set the pixel size. |
| Transparent | On | If you enter On, the lower-left corner pixel color of the PPM file is used as the transparent color. |
| Off | ||
| ImageFile | "<FilePath>" | Specify the path and file name of the external image.
"<FilePath>" is the path to a file on your local drive. |
You can use any of the above options together.
Examples
To change the marker type and shape for the waypoint with time "1 Jun 2002 12:00":
To change the marker style to a transparent image file for the first and third waypoint:
To change the marker style for all points to a square:
Return message
Group membership
This command belongs to the following group(s):
Version
12.10