Click or drag to resize

LandingProcedure Class

Represents a landing trajectory with respect to a runway surface specified by the underlying terrain. The platform will execute a level turn on the approach toward the runway before descending along the glide slope. The platform then rolls to a stop over a given distance. Lastly, if there are any taxi procedures after the landing, the platform will turn toward the next procedure.
Inheritance Hierarchy

Namespace:  AGI.Foundation.RouteDesign
Assembly:  AGI.Foundation.RouteDesign (in AGI.Foundation.RouteDesign.dll) Version: 19.5.402.0 (19.5.402.0)
Syntax
public class LandingProcedure : RouteProcedure

The LandingProcedure type exposes the following members.

Constructors
  NameDescription
Public methodLandingProcedure
Create a new instance.
Protected methodLandingProcedure(LandingProcedure, CopyContext)
Initializes a new instance as a copy of an existing instance.
Public methodLandingProcedure(Cartographic, Double, Double, ProfileDynamics, Double, Double, Double, Double, Double)
Create a landing procedure based on the given parameters with respect to the surface of the Earth. If MeanSeaLevel is available on the definition of Earth in the CalculationContext, the specified heights will be with respect to sea level.
Public methodLandingProcedure(Cartographic, Double, Double, Double, Double, Double, ProfileDynamics, Double, Double, Double)
Create a landing procedure based on the given parameters with respect to the surface of the Earth. If MeanSeaLevel is available on the definition of Earth in the CalculationContext, the specified heights will be with respect to sea level.
Public methodLandingProcedure(TerrainProvider, Cartographic, Double, Double, Double, Double, Double, ProfileDynamics, Double, Double, Double)
Create a landing procedure based on the given parameters with respect to a terrain surface.
Top
Properties
  NameDescription
Public propertyDescentAngle
Gets or sets the angle of the glide slope for the landing, in radians. This overrides the value for the descent velocity in the Dynamics.
Public propertyDynamics
Gets or sets the platform dynamics that define the pitch up and push over accelerations to use for the landing descent.
Public propertyFinalHeightAboveRunway
Gets or sets the final constant offset above the runway, in meters. This represents the height of the center of mass (or center of a 3D model) with respect to the RunwayReferenceSurface and runway offset specified by the height of the RunwayStartPosition.
Public propertyFinalSpeed
Gets or sets the final target speed at which the platform travels after rolling to a stop at the end of the landing, in meters per second.
Public propertyInitialHeightAboveRunway
Gets or sets the height above the runway at which the platform approaches the landing, in meters. This represents the height of the center of mass (or center of a 3D model) with respect to the RunwayReferenceSurface and runway offset specified by the height of the RunwayStartPosition.
Public propertyIsFrozen
Gets a value indicating whether this object is frozen. A frozen object cannot be modified and an ObjectFrozenException will be thrown if an attempt is made to do so.
(Inherited from DefinitionalObject.)
Public propertyRollDistance
Gets or sets the distance along the runway it takes to go from the landing speed to the final speed, in meters.
Public propertyRunwayHeading
Gets or sets the heading of the runway with respect to north, in radians.
Public propertyRunwayReferenceSurface
Gets or sets the terrain reference surface to use to define the heights and the surface of the runway.
Public propertyRunwayStartPosition
Gets or sets the geodetic starting point of the runway.
Public propertySpeedOnApproach
Gets or sets the target speed at which to approach the landing maneuver, in meters per second.
Public propertyTurningRadiusAfterLanding
Gets or sets the final turning radius at which to turn toward the next procedure after landing, in meters. By default, this is one meter.
Public propertyTurningRadiusOnApproach
Gets or sets the horizontal turning radius at which to turn when approaching the glide plane for landing, in meters.
Top
Methods
  NameDescription
Protected methodCheckForSameDefinition(DefinitionalObject)
Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).
(Inherited from RouteSegment.)
Protected methodCheckForSameDefinition(LandingProcedure)
Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).
Protected methodCheckForSameDefinition(RouteProcedure)
Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).
(Overrides RouteProcedureCheckForSameDefinition(RouteProcedure).)
Protected methodCheckForSameDefinition(RouteSegment)
Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).
(Inherited from RouteProcedure.)
Public methodClone
Clones this object using the specified context.
(Overrides DefinitionalObjectClone(CopyContext).)
Protected methodComputeCurrentDefinitionHashCode
Computes a hash code based on the current properties of this object. Derived classes MUST override this method and compute a hash code that combines: a unique hash code seed, the base implementation result, and the hash codes of all new fields introduced by the derived class which are used in the CheckForSameDefinition(DefinitionalObject) method.
(Overrides RouteProcedureComputeCurrentDefinitionHashCode.)
Public methodCreateConfigurableProfile
Create a profile based on the given settings that the RoutePropagator can use to configure this profile in relation to all other profiles along the route.
(Overrides RouteSegmentCreateConfigurableProfile(SurfaceSegment).)
Public methodEnumerateDependencies
Enumerates the dependencies of this object by calling EnumerateT(T) for each object that this object directly depends upon. Derived classes which contain additional dependencies MUST override this method, call the base implementation, and enumerate dependencies introduced by the derived class.
(Inherited from DefinitionalObject.)
Public methodEquals
Determines whether the specified object is equal to the current object.
(Inherited from Object.)
Protected methodFinalize
Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(Inherited from Object.)
Public methodFreeze
Freezes this object. Further attempts to modify it will result in an ObjectFrozenException.
(Inherited from DefinitionalObject.)
Protected methodFreezeAggregatedObjects
Called by Freeze to also freeze any objects that are considered to be a part of this object. Derived classes which contain additional aggregated objects MUST override this method, call the base implementation, and freeze aggregated objects introduced by the derived class. The objects that need to be frozen in this method are frequently created in this object's constructor and are not settable via properties.
(Inherited from DefinitionalObject.)
Public methodGetDefinitionHashCode
Gets a hash code representing the definition of this object.
(Inherited from DefinitionalObject.)
Public methodGetHashCode
Serves as the default hash function.
(Inherited from Object.)
Public methodGetSurfacePath
Get an object that will allow configuration of the surface geometry as it connects with other procedures.
(Overrides RouteProcedureGetSurfacePath.)
Public methodGetType
Gets the Type of the current instance.
(Inherited from Object.)
Public methodIsSameDefinition
Determines if this object has the same definition as another object.
(Inherited from DefinitionalObject.)
Protected methodMemberwiseClone
Creates a shallow copy of the current Object.
(Inherited from Object.)
Protected methodThrowIfFrozen
Throws ObjectFrozenException if this object IsFrozen. This method should be called from any method or property that modifies this object.
(Inherited from DefinitionalObject.)
Public methodToString
Returns a string that represents the current object.
(Inherited from Object.)
Top
See Also