RaimOptions Properties |
The RaimOptions type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | EnRouteArpCeilings |
Gets the Approximate Radial-Error Protected (ARP) ceiling values for the
EnRoute flight phase. The first value in the array is
the ceiling for 5 satellites in view, the second is for 6 satellites in view, and so on. The returned array
has 5 elements total, describing the ceilings for between 5 and 9 satellites in view.
The ceilings can be changed by setting new values in the returned array. See the Remarks
section for the default values.
|
| NonPrecisionApproachArpCeilings |
Gets the Approximate Radial-Error Protected (ARP) ceiling values for the
NonPrecisionApproach flight phase. The first value in the array is
the ceiling for 5 satellites in view, the second is for 6 satellites in view, and so on. The returned array
has 5 elements total, describing the ceilings for between 5 and 9 satellites in view.
The ceilings can be changed by setting new values in the returned array. See the Remarks
section for the default values.
|
| OutageDurationThreshold |
Gets or sets the outage duration threshold, which specifies how much time must pass,
while RAIM is unavailable, before a RAIM outage is signaled. This value defaults to 5 minutes.
|
| TerminalArpCeilings |
Gets the Approximate Radial-Error Protected (ARP) ceiling values for the
Terminal flight phase. The first value in the array is
the ceiling for 5 satellites in view, the second is for 6 satellites in view, and so on. The returned array
has 5 elements total, describing the ceilings for between 5 and 9 satellites in view.
The ceilings can be changed by setting new values in the returned array. See the Remarks
section for the default values.
|
| Thresholds |
Gets the default thresholds used for alarm. The first value in the array is the threshold for
5 satellites in view, the second is for 6 satellites in view, and so on. The returned array
has 5 elements total, describing the thresholds for between 5 and 9 satellites in view.
The thresholds can be changed by setting new values in the returned array. See the Remarks
section for the default values.
|
See Also