LowNoiseAmplifier Class

Initializes a new instance.

Initializes a new instance as a copy of an existing instance.

Initializes a new instance from the given signal input, amplification gains, noise factor, and reference temperature.

Gets or sets the signal processor which produces the set of signals which this processor modifies.

Gets a value indicating whether this object is frozen. A frozen object cannot be modified and an ObjectFrozenException will be thrown if an attempt is made to do so.

Gets or sets the gain to apply to the input signal.

Gets or sets the gain applied before the signal is amplified. Typically due to cabling from the antenna to the LNA. Note that if this is a loss, the Gain should be less than 1.

Gets or sets the gain applied after the signal has been amplified. Typically due to cabling from the LNA to the receiver. Note that if this is a loss, the LnaOutputGain should be less than 1.

Gets or sets the noise factor representing the ratio of the NoiseTemperature to ReferenceTemperature plus 1 (i.e. NoiseFactor = NoiseTemperature/ReferenceTemperature + 1).

Gets the system noise temperature calculated from the different gain values, the NoiseFactor and the ReferenceTemperature.

Gets or sets the amplifier's operating temperature. Note that this temperature is used for both the input and output.

Gets the signal processor representing the output of the service provider.

Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).

Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).

Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).

Checks to determine if another instance has the same definition as this instance and returns if it does. Derived classes MUST override this method and check all new fields introduced by the derived class for definitional equivalence. It is NOT necessary to check base class fields because the base class will already have done that. When overriding this method, you should NOT call the base implementation because it will return for all derived-class instances. Derived classes should check the type of other to preserve the symmetric nature of IsSameDefinition(Object).

Clones this object using the specified context.

Computes a hash code based on the current properties of this object. Derived classes MUST override this method and compute a hash code that combines: a unique hash code seed, the base implementation result, and the hash codes of all new fields introduced by the derived class which are used in the CheckForSameDefinition(DefinitionalObject) method.

Enumerates the dependencies of this object by calling EnumerateT(T) for each object that this object directly depends upon. Derived classes which contain additional dependencies MUST override this method, call the base implementation, and enumerate dependencies introduced by the derived class.

Determines whether the specified object is equal to the current object.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

Freezes this object. Further attempts to modify it will result in an ObjectFrozenException.

Called by Freeze to also freeze any objects that are considered to be a part of this object. Derived classes which contain additional aggregated objects MUST override this method, call the base implementation, and freeze aggregated objects introduced by the derived class. The objects that need to be frozen in this method are frequently created in this object's constructor and are not settable via properties.

Gets a hash code representing the definition of this object.

Serves as the default hash function.

Get an evaluator which computes the time delay between the input and output of this signal processor.

Gets the service object of the specified type.

Get an evaluator which can produce the output from the signal processor.

Get an evaluator which modifies the InputSignalProcessor by applying the LnaGain.

Gets the Type of the current instance.

Determines if this object has the same definition as another object.

Creates a shallow copy of the current Object.

Throws ObjectFrozenException if this object IsFrozen. This method should be called from any method or property that modifies this object.

Returns a string that represents the current object.