Axes: Ticks

Use the Ticks tab to set the display of ticks along the axes.

Some controls only appear for certain plots or with certain options selected.

Control Name	Use/Options
Values	Set the values for the ticks. Auto -- let the system decide which ticks to show Linear -- list every tick
Max #	Set the maximum number of ticks to show. [0]/-/+/slider -- scale is 0 to 50
Reference	This field does not work with the "Auto" setting. [0]
Spacing	This field does not work with the "Auto" setting. [?] -- set the spacing between each tick preset options: x10 -- only uses tens as tick numbers (i.e., 0, 10, 20, 30, etc.) 1/2/5 -- uses a pre-defined set of numbers as ticks all digits -- uses all numbers
Position	Sets the position of the tick mark. Outside -- sets the tick on the outside of the axis Inside -- set the tick on the inside of the axis None -- no tick
Length	Sets the length of the tick mark. [0]/-/+/slider -- scale is 0 to 20
Width	Sets the width of the tick mark. [0]/-/+/slider -- scale is 0 to 10
Color	Sets the color of the tick mark. Color -- see Color picker