Graphics FillTranslucency
Set the percent translucency of the fill for a Sensor or AreaTarget.
Syntax
Graphics <ObjectPath> FillTranslucency <Value>
Related commands
Description
The Graphics FillTranslucency command allows you to set the percent translucency of the fill for a Sensor or AreaTarget.
<Value> can be between 0.0 and 100.0
Examples
To set the translucency of the fill in the area covered by Sensor1 to 20%:
Graphics */Satellite/Satellite1/Sensor/Sensor1 FillTranslucency 20
To set the translucency of the fill in the area covered by AreaTarget1 to 90%:
Graphics */AreaTarget/AreaTarget1 FillTranslucency 90
Return message
Group membership
This command belongs to the following group(s):
Version
10